Delta-Mobrey VLS Series Solids Level Switch Level Switch, Vertical, Horizontal, ATEX-Rated, Non-Asbestos Sheet, Housing

Bekijk alle Level Sensors

Subtotaal (1 eenheid)*

€ 838,38

(excl. BTW)

€ 1.014,44

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • Plus verzending 8 stuk(s) vanaf 22 april 2026
  • Plus verzending 6 stuk(s) vanaf 24 april 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 +€ 838,38

*prijsindicatie

RS-stocknr.:
511-5157
Fabrikantnummer:
VLSKB131Z
Fabrikant:
Delta-Mobrey
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Delta-Mobrey

Device Type

Solids Level Switch

Product Type

Level Switch

Mount Type

Vertical, Horizontal

Housing Material

Aluminium Alloy

Cable Length

235mm

Minimum Operating Temperature

-20°C

Maximum Operating Temperature

110°C

Maximum DC Voltage

55V dc

Maximum AC Voltage

265V ac

Maximum Current

8A

Maximum Pressure

10bar

Gasket Material

Non-Asbestos Sheet

Standards/Approvals

No

Series

VLS

Hazardous Area Certification

ATEX

Vrijgesteld

Mobrey Level Switch


The Mobrey vibrating rod level switch is the perfect solution for single-point level switching in free-flowing solids across a wide density range, from fine powders to grains. A single rod design provides the solution to tuning forks which may become blocked or bridged. The vibration rod is energized and kept in resonance by an electronic circuit. When covered by material, the damping of the vibration is detected by the electronics which initiate the switching of the output relay after a built-in programmable time delay.

Supplied with:

User manual, 2 – 3-pole terminal blocks, 1in sealing, 2 – Pg 16 cable glands.

How do you carry out an installation?

Requiring only a 1in BSP/NPT socket, either on the top or in the sidewall of the silo, the unit is easy to install and simple to the commission.

Prior to installation, it is advised to check the switching function for proper adjustment on a sample quantity of material. The unit may not work with mediums within specified density range but having a very large size of granules or extremely little friction.

WARNING!

Handle device with great care, especially the sensing probe. Any impact on the sensing probe can ruin its resonance system.

A protective shield should be installed if the probe is exposed to falling material or an excessive mechanical load.

Features and Benefits


Standard model with 1 x SPDT alarm relay

It has an operating voltage of 20VAC/DC to 255VAC/DC

Housing standard is aluminium alloy with powder coated

Standard R 1-1/2in BSPT mounting connection

Free-flowing solids and it eliminates the clogging and ridging problems associated with forks

Rod design prevents product bridging

External LED switch status indication display and the probe is maintenance free

Relay output

Compact and rugged design and relay output

Applications


It is designed to provide high or low-level switching in silos or bins containing free-flowing powders and granular materials such as carbon black, sugar, grain, cement, lime and sand with a material bulk density on 50 kg/m3 or more

Vibrating Liquid/Solid

Level Probes - Squings

Certifications


ATEX II 1/2 D

IP67 rated

Gerelateerde Links