Vega VEGAWAVE 61 Series Vibrating Level Switch Vibrating Level Switch, Cable, ATEX-Rated, Klingersil C-4400, Housing

RS-stocknr.:: 768-2000
Fabrikantnummer:: WAVES61.EEJ2RA
Fabrikant:: Vega

Vega VEGAWAVE 61 Series Vibrating Level Switch Vibrating Level Switch, Cable, ATEX-Rated, Klingersil C-4400, Housing

Afbeelding representeert productcategorie

Subtotaal (1 eenheid)*

€ 562,80

(excl. BTW)

€ 680,99

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

3 stuk(s) klaar voor verzending vanaf een andere locatie
Plus verzending 5 stuk(s) vanaf 09 juli 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 562,80

*prijsindicatie

RS-stocknr.:: 768-2000
Fabrikantnummer:: WAVES61.EEJ2RA
Fabrikant:: Vega

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Vega
	Product Type	Vibrating Level Switch
	Device Type	Vibrating Level Switch
	Mount Type	Cable
	Housing Material	Plastic Polybutylene Terephthalate
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	150°C
	Maximum AC Voltage	253V ac
	Maximum DC Voltage	72V dc
	Maximum Current	3A
	Maximum Pressure	1.1bar
	Gasket Material	Klingersil C-4400
	Standards/Approvals	Dust ATEX II 1/3 D IP6X T
	Hazardous Area Certification	ATEX
	Series	VEGAWAVE 61

	Alles selecteren
	Merk Vega
	Product Type Vibrating Level Switch
	Device Type Vibrating Level Switch
	Mount Type Cable
	Housing Material Plastic Polybutylene Terephthalate
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 150°C
	Maximum AC Voltage 253V ac
	Maximum DC Voltage 72V dc
	Maximum Current 3A
	Maximum Pressure 1.1bar
	Gasket Material Klingersil C-4400
	Standards/Approvals Dust ATEX II 1/3 D IP6X T
	Hazardous Area Certification ATEX
	Series VEGAWAVE 61

N.v.t.

Land van herkomst:: DE

Vega Vibrating Level Switch

The Vega vibrating level switch has a relay (DPDT) output. It is energized by a piezo crystal and it vibrates at a fixed amplitude. If the vibrating rod is covered by the product, the amplitude change is detected by the integral electronics and converted into a switch signal. The switching condition is visible from outside via a two-colour LED. Vibrating Liquid/Solid Level Probes - Squings.

All of these probes are maintenance-free and have an external LED switch status indication.

Features and Benefits

The supply voltage ranging from 20VAC to 253VAC and 20VDC to 72VDC

Process fitting material is thread G1½ PN25, DIN3852-A

Easy setup without adjustment

Product-independent switching point

Rugged sensor construction

Insensitive to build-up and statically charged products

Solid densities from 8g/l reliably detected

maintenance-free and does not wear out easily

External LED switch

Housing material PBT (plastic)

Density is greater than 100g/l

Breaking capacity maximum 750VA, 54W

Applications

Typical applications are overfill and low-level detection in media like grain, fine aggregates, sand and heavier powders such as cement and metal oxides

Almost all the bulk solids applications

Certifications

IP66 rated

IP67 rated

ATEX II 1/3 D IP6X T