SICK C2MT Series Light Curtain Receiver, Sender, 24 mm Resolution

RS-stocknr.:: 701-2930
Fabrikantnummer:: C2MT-07824BBC03FB0
Fabrikant:: SICK

Subtotaal (1 eenheid)*

€ 627,28

(excl. BTW)

€ 759,01

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Voorradig bij de fabrikant

Klaar voor verzending vanaf 18 december 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 627,28

*prijsindicatie

RS-stocknr.:: 701-2930
Fabrikantnummer:: C2MT-07824BBC03FB0
Fabrikant:: SICK

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	SICK
	Product Type	Light Curtain
	Series	C2MT
	Beam Resolution	24mm
	Component Type	Receiver, Sender
	Safety Type	Type 2
	Standards/Approvals	ACMA, CE, cUL, EC-Type-Examination, GB, GB/T, IEC, Moroccan, OSHA, RoHS, UKCA, cULus
	Protective Height	780mm
	Maximum Protective Width	8m
	Maximum Supply Voltage	24V dc
	Minimum Scanning Distance	0μm
	Maximum Scanning Distance	8m
	Maximum Response Time	13ms
	Width	15mm
	Length	32mm
	Height	780mm
	Terminal Type	5-Pin M12

	Alles selecteren
	Merk SICK
	Product Type Light Curtain
	Series C2MT
	Beam Resolution 24mm
	Component Type Receiver, Sender
	Safety Type Type 2
	Standards/Approvals ACMA, CE, cUL, EC-Type-Examination, GB, GB/T, IEC, Moroccan, OSHA, RoHS, UKCA, cULus
	Protective Height 780mm
	Maximum Protective Width 8m
	Maximum Supply Voltage 24V dc
	Minimum Scanning Distance 0μm
	Maximum Scanning Distance 8m
	Maximum Response Time 13ms
	Width 15mm
	Length 32mm
	Height 780mm
	Terminal Type 5-Pin M12

Land van herkomst:: DE

SICK C2MT Series Light Curtain, 780mm Protective Height, 8m Maximum Scanning Distance - C2MT-07824BBC03FB0

This light curtain receiver provides protective presence sensing for industrial access and safeguarding tasks. Designed for standalone operation with optical synchronisation and twin-stick delivery, it operates from a 24V DC supply and is suited to environments requiring compact, non-intrusive safety sensing. The device includes system plugs and mounting brackets for Rapid installation and is specified for continuous monitoring roles where a defined protective field height and response performance are required.

Features and Benefits:

• 13ms response time for Rapid hazard detection
• 24mm beam resolution for precise object recognition
• 24V DC supply operation for standard industrial power rails
• Optical synchronisation without separate cabling for simplified set-up
• PNP short-circuit protected outputs for safe switching

Applications

• Suitable for safeguarding machine access openings on production lines
• Ideal for integration with safety relay controls and EDM systems
• Used with automated cells requiring Compact presence detection
• Can be used for perimeter protection where 780mm coverage is required

What connection method does the device use?

It uses a hard-wired system connection via a 5-pin M12 plug with a 700mm cable.

How does the unit behave if a fault occurs?

The safe state is entered by at least one OSSD switching to the OFF condition.

What environmental limits apply to operation?

It operates between -20°C and +55°C with IP65 enclosure protection.

How is the device synchronised in multi-stick setups?

Synchronisation is optical and does not require a separate synchronisation line.

Note

Two identical miniTwin-stick packages MUST always be ordered for a complete system.,Cable: Each miniTwin is supplied with an M12 5-pin 1-way system plug. To cascade 3 pairs you will need 2 x cascade cables. Either 701-2962 for miniTwin up to 540mm or 701-2971 for miniTwin over 600mm. These cascade cables have 2 x plugs and should be attached to the rear of your middle pair of miniTwin. The cascade extender cable 701-2974 can be used in conjunction with the 2 x cascade cables to increase the distance between miniTwin if required. Regardless of whether you use these devices stand-alone or in a 2 x pair or cascade format you will need to purchase 2 x M12 5-pin connector cable eg 523-0335.,Brackets: 2 x C-Fix and 2 x L-Fix brackets are supplied with each miniTwin. To mount (stand-alone only) as a flat installation on a profile frame or in a machine niche purchase optional O-Fix brackets 701-2978