SICK C2MT Series Light Curtain Receiver, Sender, 34 mm Resolution

RS-stocknr.:: 701-2959
Fabrikantnummer:: C2MT-04834BBC03DB0
Fabrikant:: SICK

Subtotaal (1 eenheid)*

€ 464,16

(excl. BTW)

€ 561,63

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

Plus verzending 1 stuk(s) vanaf 16 november 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 464,16

*prijsindicatie

RS-stocknr.:: 701-2959
Fabrikantnummer:: C2MT-04834BBC03DB0
Fabrikant:: SICK

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	SICK
	Product Type	Light Curtain
	Series	C2MT
	Beam Resolution	34mm
	Component Type	Receiver, Sender
	Safety Type	Type 2
	Standards/Approvals	ACMA, CE, cUL, EC-Type-Examination, GB, GB/T, IEC, Moroccan, OSHA, RoHS, UKCA, cULus
	Protective Height	480mm
	Maximum Supply Voltage	24V dc
	Maximum Protective Width	8m
	Minimum Scanning Distance	0μm
	Maximum Scanning Distance	8m
	Width	15mm
	Height	480mm
	Maximum Response Time	13ms
	Length	32mm
	Terminal Type	5-Pin M12

	Alles selecteren
	Merk SICK
	Product Type Light Curtain
	Series C2MT
	Beam Resolution 34mm
	Component Type Receiver, Sender
	Safety Type Type 2
	Standards/Approvals ACMA, CE, cUL, EC-Type-Examination, GB, GB/T, IEC, Moroccan, OSHA, RoHS, UKCA, cULus
	Protective Height 480mm
	Maximum Supply Voltage 24V dc
	Maximum Protective Width 8m
	Minimum Scanning Distance 0μm
	Maximum Scanning Distance 8m
	Width 15mm
	Height 480mm
	Maximum Response Time 13ms
	Length 32mm
	Terminal Type 5-Pin M12

Land van herkomst:: DE

SICK C2MT Series Light Curtain, 480mm Protective Height, 8m Maximum Scanning Distance - C2MT-04834BBC03DB0

This light curtain is a Compact safety receiver designed to protect access points in industrial automation. It operates as a standalone miniTwin device with optical synchronisation and delivers guarded detection across its protective field. The unit accepts a 24VDC supply and provides PNP OSSD outputs for integration into safety controls, with LEDs for status indication and a short system cable for connection.

Features and Benefits:

• 13ms maximum response time for prompt hazard detection
• 34mm beam resolution enabling coarse-object detection
• 0m minimum scanning distance for near-field protection
• 8m maximum protective width to guard large openings
• Optical synchronisation without extra wiring for simple setup

Applications

• Suitable for guarding machine access points in production lines
• Ideal for integration with safety relays requiring OSSD outputs
• Used for perimeter protection of automated handling systems
• Can be used for retrofit where a Compact profile is needed

What supply range will operate the receiver?

It accepts 24V DC within 19.2V DC to 28.8V DC and tolerates ≤10% ripple.

How are outputs presented for safety control integration?

Two PNP OSSD switching outputs are short-circuit protected and cross-circuit monitored.

What environmental conditions can it withstand?

It is rated to IP65, operates between -20°C and +55°C, and tolerates 15% to 95% non-condensing humidity.

What mechanical profile aids installation in tight spaces?

The housing cross-section is 15mm x 32mm and the unit weight is 175g.

Which certifications and approvals does it carry?

It holds multiple declarations and approvals including CE, UKCA, cULus and RoHS.

Note

Two identical miniTwin-stick packages MUST always be ordered for a complete system.,Cable: Each miniTwin is supplied with an M12 5-pin 1-way system plug. To cascade 3 pairs you will need 2 x cascade cables. Either 701-2962 for miniTwin up to 540mm or 701-2971 for miniTwin over 600mm. These cascade cables have 2 x plugs and should be attached to the rear of your middle pair of miniTwin. The cascade extender cable 701-2974 can be used in conjunction with the 2 x cascade cables to increase the distance between miniTwin if required. Regardless of whether you use these devices stand-alone or in a 2 x pair or cascade format you will need to purchase 2 x M12 5-pin connector cable eg 523-0335.,Brackets: 2 x C-Fix and 2 x L-Fix brackets are supplied with each miniTwin. To mount (stand-alone only) as a flat installation on a profile frame or in a machine niche purchase optional O-Fix brackets 701-2978