Honeywell HDLS Series Rod Limit Switch, SPDT, IP67, Die Cast Zinc Housing, 24V ac, 10A
- RS-stocknr.:
- 193-1999
- Artikelnummer Distrelec:
- 303-44-391
- Fabrikantnummer:
- LSQ310-20
- Fabrikant:
- Honeywell
Afbeelding representeert productcategorie
Subtotaal (1 eenheid)*
€ 658,58
(excl. BTW)
€ 796,88
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 8 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 658,58 |
*prijsindicatie
- RS-stocknr.:
- 193-1999
- Artikelnummer Distrelec:
- 303-44-391
- Fabrikantnummer:
- LSQ310-20
- Fabrikant:
- Honeywell
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Honeywell | |
| Actuator Type | Rod | |
| Product Type | Limit Switch | |
| Contact Configuration | SPDT | |
| IP Rating | IP67 | |
| Housing Material | Die Cast Zinc | |
| Contact Type | Snap Action | |
| Switching Current | 10A | |
| Terminal Type | Screw | |
| Series | HDLS | |
| Minimum Operating Temperature | -40°C | |
| Switching AC Voltage | 24V ac | |
| Switching DC Voltage | 24V dc | |
| Maximum Operating Temperature | 121°C | |
| Width | 1.62in | |
| Length | 106.42mm | |
| Depth | 2.43in | |
| Standards/Approvals | UL, CSA | |
| Hazardous Area Certification | NO | |
| Alles selecteren | ||
|---|---|---|
Merk Honeywell | ||
Actuator Type Rod | ||
Product Type Limit Switch | ||
Contact Configuration SPDT | ||
IP Rating IP67 | ||
Housing Material Die Cast Zinc | ||
Contact Type Snap Action | ||
Switching Current 10A | ||
Terminal Type Screw | ||
Series HDLS | ||
Minimum Operating Temperature -40°C | ||
Switching AC Voltage 24V ac | ||
Switching DC Voltage 24V dc | ||
Maximum Operating Temperature 121°C | ||
Width 1.62in | ||
Length 106.42mm | ||
Depth 2.43in | ||
Standards/Approvals UL, CSA | ||
Hazardous Area Certification NO | ||
Maintained Contact, Spoke Actuator Limit Switch
This spoke actuator switch is used to detect a transient target and remember its position.
The target passes through the spoke rotating the spoke by a quarter turn. This toggles the switch, normally a closed circuit, from ON to OFF. If another target transitions through the spoke, it will again toggle the switch this time from OFF to ON. Alternatively, the target can return back through the spoke again toggling the switch from OFF to ON. The spoke once rotated will maintain its position until it is moved to a new section - this is unlike normal limit switch actuation which normally will want to return to its rest position - with this switch there are 4 rest positions at each 90° points in a 360° rotation.
The tip over point is at 60° at which point the spoke will rotate to the next segment position.
Approvals
UL, CSA
Standards
EN60947-5-1, IEC947-5-1
Gerelateerde Links
- Honeywell HDLS Series Rotary Limit Switch IP67, Die Cast Zinc Housing
- Honeywell HDLS Series Roller Lever Limit Switch IP67, Die Cast Zinc Housing
- Honeywell HDLS Series Plunger Limit Switch IP65 IP67, Die Cast Zinc Housing
- Honeywell HDLS Series Plunger Limit Switch IP67 240 V ac, 10 A
- Honeywell HDLS Series Rotary Head Limit Switch IP67 240 V ac, 10 A
- Honeywell HDLS Series Roller Lever Limit Switch IP67 240 V ac, 10 A
- Honeywell HDLS Series Adjustable Roller Lever Limit Switch IP67 240 V ac, 10 A
- Honeywell HDLS Series Roller Lever Limit Switch IP67 Die Cast Zinc Housing 10A Max