Honeywell LS Series Roller Lever Limit Switch, SPDT, IP67, Die Cast Zinc Housing, 240V, 10A

RS-stocknr.:: 217-7109
Fabrikantnummer:: 1LS243-4PG
Fabrikant:: Honeywell

Honeywell LS Series Roller Lever Limit Switch, SPDT, IP67, Die Cast Zinc Housing, 240V, 10A

Subtotaal (1 eenheid)*

€ 477,08

(excl. BTW)

€ 577,27

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Tijdelijk niet op voorraad

Verzending 8 stuk(s) vanaf 29 juni 2026
Plus verzending 12 stuk(s) vanaf 03 augustus 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 477,08

*prijsindicatie

RS-stocknr.:: 217-7109
Fabrikantnummer:: 1LS243-4PG
Fabrikant:: Honeywell

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Honeywell
	Actuator Type	Roller Lever
	Product Type	Limit Switch
	IP Rating	IP67
	Contact Configuration	SPDT
	Housing Material	Die Cast Zinc
	Contact Type	Snap Action
	Terminal Type	Screw
	Switching Current	10A
	Series	LS
	Minimum Operating Temperature	-29°C
	Switching AC Voltage	240V
	Maximum Operating Temperature	+120°C
	Length	79mm
	Depth	44mm
	Width	35mm
	Standards/Approvals	RoHS
	Hazardous Area Certification	No
	Conduit Entry	PG13.5
	Mechanical Life	10000000Cycles
	Operating Force	0.51Nm
	Mounting Orientation	Side

	Alles selecteren
	Merk Honeywell
	Actuator Type Roller Lever
	Product Type Limit Switch
	IP Rating IP67
	Contact Configuration SPDT
	Housing Material Die Cast Zinc
	Contact Type Snap Action
	Terminal Type Screw
	Switching Current 10A
	Series LS
	Minimum Operating Temperature -29°C
	Switching AC Voltage 240V
	Maximum Operating Temperature +120°C
	Length 79mm
	Depth 44mm
	Width 35mm
	Standards/Approvals RoHS
	Hazardous Area Certification No
	Conduit Entry PG13.5
	Mechanical Life 10000000Cycles
	Operating Force 0.51Nm
	Mounting Orientation Side

Honeywell Limit Switch, Side Rotary Actuator, 20mm Conduit Entry - 1LS243-4PG

This limit switch is a compact, industrial position sensor designed for mechanical control and safety monitoring in automation systems. It provides reliable actuation via a side rotary mechanism and is intended for installations where a small footprint and robust environmental protection are required.

Features and Benefits:

• IP67-rated enclosure for use in wet or dusty environments
• Die-cast zinc housing for improved impact endurance
• SPDT snap-action contacts for clear single-change switching
• Screw terminals for secure, retrievable wiring connections
• Switching capability up to 10A at 480V for mains-level loads
• Mechanical durability rated to 10 million cycles for long service life

Applications

• Suitable for conveyor end-of-travel detection in factories
• Ideal for limit sensing on packaging machinery
• Used with gate and barrier position monitoring systems
• Can be used for actuator end-stop feedback in assembly lines
• Suitable for use in outdoor enclosures requiring sealed entries

What conduit provisions are available for cable entry?

A 20mm conduit entry is provided to accept standard threaded conduit or glands for routed wiring.

How does the actuator orientation affect installation?

The device is designed for side mounting, with the rotary actuator positioned for lateral actuation in constrained spaces.

What temperature range can it operate within?

It is rated for operation between -10°C and 80°C to suit typical industrial ambient conditions.

What type of electrical termination is used for connections?

Screw-type terminals allow straightforward connection and maintenance with standard tools.

Are there any regulatory material considerations?

The product conforms to RoHS requirements regarding restricted substances in its materials.