Honeywell Technologies LS Series Roller Lever Limit Switch, SPDT, IP67, Die Cast Zinc Housing, 240V, 10A

RS-stocknr.:: 217-7110
Fabrikantnummer:: 1LS244-4PG
Fabrikant:: Honeywell Technologies

Honeywell Technologies LS Series Roller Lever Limit Switch, SPDT, IP67, Die Cast Zinc Housing, 240V, 10A

Subtotaal (1 eenheid)*

€ 448,27

(excl. BTW)

€ 542,41

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

41 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 448,27

*prijsindicatie

RS-stocknr.:: 217-7110
Fabrikantnummer:: 1LS244-4PG
Fabrikant:: Honeywell Technologies

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Honeywell Technologies
	Actuator Type	Roller Lever
	Product Type	Limit Switch
	IP Rating	IP67
	Contact Configuration	SPDT
	Housing Material	Die Cast Zinc
	Contact Type	Snap Action
	Terminal Type	Terminal Block
	Switching Current	10A
	Series	LS
	Switching DC Voltage	550V
	Switching AC Voltage	240V
	Minimum Operating Temperature	-29°C
	Maximum Operating Temperature	120°C
	Standards/Approvals	UL file 12252, IEC60947-5-4, EN60947-5-41, CSA file 57325, CE
	Length	38.1mm
	Hazardous Area Certification	No
	Conduit Entry	PG13.5
	Mounting Orientation	Panel
	Operating Force	0.51N

	Alles selecteren
	Merk Honeywell Technologies
	Actuator Type Roller Lever
	Product Type Limit Switch
	IP Rating IP67
	Contact Configuration SPDT
	Housing Material Die Cast Zinc
	Contact Type Snap Action
	Terminal Type Terminal Block
	Switching Current 10A
	Series LS
	Switching DC Voltage 550V
	Switching AC Voltage 240V
	Minimum Operating Temperature -29°C
	Maximum Operating Temperature 120°C
	Standards/Approvals UL file 12252, IEC60947-5-4, EN60947-5-41, CSA file 57325, CE
	Length 38.1mm
	Hazardous Area Certification No
	Conduit Entry PG13.5
	Mounting Orientation Panel
	Operating Force 0.51N

Honeywell Series LS Limit Switch, Side Rotary Actuator Type, Die Cast Zinc Housing - 1LS244-4PG

This limit switch provides positional detection and circuit switching for industrial automation and control systems. It is a compact, side-actuated device designed for demanding environments, offering electrical switching capability for both AC and DC circuits while maintaining ingress protection for use where dust and water resistance are required.

Features and Benefits:

• IP67 ingress protection enables use in wet or dusty locations
• SPDT snap‑action contacts deliver positive, fast switching
• Rated switching current of 10A supports medium‑power loads
• AC switching up to 480V and DC switching up to 550V suits varied supplies
• Low operating force 0.51 N reduces wear on actuating mechanisms
• Terminal Block with NPT conduit entry simplifies field wiring

Applications

• Suitable for limit sensing on conveyor end‑stops
• Ideal for position feedback on industrial valves and actuators
• Used with motor control panels for safety interlocks
• Can be used for door‑open/closed detection in enclosures
• Suitable for packaging machinery position monitoring

What materials make the enclosure Durable for industrial use?

The housing is die‑cast zinc, providing mechanical robustness and resistance to impact in factory settings.

How does the actuator Interface with mounting or linkage arrangements?

The unit uses a side rotary actuator type, allowing shaft or lever linkage to engage at a right angle to the switch body.

Which standards or approvals does it meet for safety and interoperability?

It conforms to IEC 60947‑5‑4 and EN 60947‑5‑41 and is listed under UL file 12252 and CSA file 57325 for recognised industrial use.

What Terminal and conduit options are available for electrical entry?

It employs a Terminal Block termination and accepts 0.5 to 14 NPT conduit entry for secure cable routing.

What thermal limits should be observed during installation?

The operating temperature range spans from −30 °C to 150 °C, requiring attention to ambient and enclosure temperatures during placement.