Honeywell E7 Series Pin Plunger Limit Switch, SPDT, IP65, Die Cast Zinc Housing, 240V ac, 10A

RS-stocknr.:: 217-7128
Fabrikantnummer:: DTE7-2RN-PG
Fabrikant:: Honeywell

Honeywell E7 Series Pin Plunger Limit Switch, SPDT, IP65, Die Cast Zinc Housing, 240V ac, 10A

Subtotaal (1 eenheid)*

€ 537,46

(excl. BTW)

€ 650,33

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

3 stuk(s) klaar voor verzending vanaf een andere locatie
Plus verzending 25 stuk(s) vanaf 22 juni 2026
Plus verzending 25 stuk(s) vanaf 17 augustus 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 537,46

*prijsindicatie

RS-stocknr.:: 217-7128
Fabrikantnummer:: DTE7-2RN-PG
Fabrikant:: Honeywell

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Honeywell
	Product Type	Limit Switch
	Actuator Type	Pin Plunger
	Contact Configuration	SPDT
	IP Rating	IP65
	Housing Material	Die Cast Zinc
	Contact Type	Snap Action
	Terminal Type	Threaded Conduit
	Switching Current	10A
	Series	E7
	Minimum Operating Temperature	-30°C
	Switching DC Voltage	250V dc
	Switching AC Voltage	240V ac
	Maximum Operating Temperature	70°C
	Standards/Approvals	EN/IEC 60947-5-1, CE, CSA file 15775 (BZ prefix only)
	Hazardous Area Certification	NO
	Conduit Entry	0.5 to 14 NPSM
	Operating Force	1389g
	Mounting Orientation	Diagonal Side

	Alles selecteren
	Merk Honeywell
	Product Type Limit Switch
	Actuator Type Pin Plunger
	Contact Configuration SPDT
	IP Rating IP65
	Housing Material Die Cast Zinc
	Contact Type Snap Action
	Terminal Type Threaded Conduit
	Switching Current 10A
	Series E7
	Minimum Operating Temperature -30°C
	Switching DC Voltage 250V dc
	Switching AC Voltage 240V ac
	Maximum Operating Temperature 70°C
	Standards/Approvals EN/IEC 60947-5-1, CE, CSA file 15775 (BZ prefix only)
	Hazardous Area Certification NO
	Conduit Entry 0.5 to 14 NPSM
	Operating Force 1389g
	Mounting Orientation Diagonal Side

Datasheet - DTE7-2RN-PG

Honeywell Limit Switch, Pin Plunger Actuator, 680g Operating Force - DTE7-2RN-PG

This limit switch provides a robust means of detecting position changes and controlling circuits in industrial installations. Constructed for side-diagonal mounting, it employs a pin-plunger actuator and is intended for use where discrete switching is required under mechanical motion or presence detection. The enclosure gives environmental protection suitable for many factory and field settings.

Features and Benefits:

• Die cast aluminium housing delivers corrosion-resistant durability
• IP65 sealed enclosure resists dust and low-pressure water jets
• SPDT snap-action contacts enable Rapid make-and-break switching
• Rated for 10A at AC applications to handle moderate loads
• 250V DC switching capability supports DC control circuits
• Operating force of 680g ensures consistent actuation threshold

Applications

• Suitable for conveyor end-of-travel detection in manufacturing lines
• Ideal for actuator position sensing in automated valves
• Used for safety cut-off sensing on packaging machinery
• Can be used for limit detection in material handling equipment
• Suitable for integration in control panels requiring threaded conduit entry

What conduit Interface does it provide for wiring?

The unit accepts threaded conduit connections sized 0.5-14 NPSM for secure cable entry.

How should it be mounted to align with mechanical linkages?

It is designed for diagonal side mounting to match common actuator geometries and reduce linkage stress.

What standards underpin its electrical switching design?

The switch conforms to EN/IEC 60947-5-1 functional switching requirements and carries relevant safety approvals.

What temperature range can it tolerate during operation?

It is specified to operate from a minimum of -30°C up to a maximum of 70°C without performance degradation.