Honeywell BZE7 Series Plunger Limit Switch, SPDT, IP65, Die Cast Aluminium Housing, 480V

RS-stocknr.:: 808-2849
Artikelnummer Distrelec:: 303-01-466
Fabrikantnummer:: BZE7-2RN-PG
Fabrikant:: Honeywell

Honeywell BZE7 Series Plunger Limit Switch, SPDT, IP65, Die Cast Aluminium Housing, 480V

Bulkkorting beschikbaar

Subtotaal (1 eenheid)*

€ 248,65

(excl. BTW)

€ 300,87

(incl. BTW)

Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw

Aantal stuks	Per stuk
1 - 4	€ 248,65
5 - 9	€ 238,69
10 +	€ 226,28

*prijsindicatie

RS-stocknr.:: 808-2849
Artikelnummer Distrelec:: 303-01-466
Fabrikantnummer:: BZE7-2RN-PG
Fabrikant:: Honeywell

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Honeywell
	Product Type	Limit Switch
	Actuator Type	Plunger
	Contact Configuration	SPDT
	IP Rating	IP65
	Housing Material	Die Cast Aluminium
	Contact Type	Snap Action
	Terminal Type	Screw
	Series	BZE7
	Switching AC Voltage	480V
	Minimum Operating Temperature	-30°C
	Maximum Operating Temperature	71°C
	Depth	39.37mm
	Length	76.4mm
	Standards/Approvals	CSA, EN/IEC 60947-5-1
	Hazardous Area Certification	NO
	Mounting Orientation	Side
	Operating Force	680g
	Conduit Entry	13.5 mm

	Alles selecteren
	Merk Honeywell
	Product Type Limit Switch
	Actuator Type Plunger
	Contact Configuration SPDT
	IP Rating IP65
	Housing Material Die Cast Aluminium
	Contact Type Snap Action
	Terminal Type Screw
	Series BZE7
	Switching AC Voltage 480V
	Minimum Operating Temperature -30°C
	Maximum Operating Temperature 71°C
	Depth 39.37mm
	Length 76.4mm
	Standards/Approvals CSA, EN/IEC 60947-5-1
	Hazardous Area Certification NO
	Mounting Orientation Side
	Operating Force 680g
	Conduit Entry 13.5 mm

Vrijgesteld

Land van herkomst:: GB

Honeywell BZE7 Series Limit Switch, P inches Plunger Actuator, 680g Operating Force - BZE7-2RN-PG

This limit switch provides precise mechanical actuation detection for industrial control systems, converting linear movement into an electrical change. It is built for side mounting and intended for environments where a snap-action contact and a pin-style actuator are required. The unit connects via a threaded conduit entry and is suitable for panel and machinery installations that need a compact, rugged switching element.

Features and Benefits:

• Pin plunger actuator delivers repeatable mechanical engagement
• SPDT snap action contact allows reliable single-pole changeover switching
• Electrostatic epoxy coated aluminium housing offers corrosion resistance
• Threaded conduit Terminal supports secure electrical conduit connection
• Operating range from -30 to +70°C enables wide thermal tolerance
• 680g operating force provides consistent actuation threshold

Applications

• Suitable for conveyor end-of-travel detection in manufacturing lines
• Ideal for position sensing on industrial valves and dampers
• Used with automated packaging machines for limit and interlock control
• Can be used for safety interlocks in access panels and guards
• Suitable for retrofits requiring a side-mounted mechanical switch

What ingress protection options are available for harsh environments?

The device is rated to both IP50 and IP65 depending on the specified enclosure configuration, allowing selection for dust resistance or full protection against low-pressure water jets.

Which standards does it meet for industrial electrical switching?

It is approved to CSA and conforms to EN/IEC 60947-5-1 requirements for control circuit switching devices.

How is the switch mounted and oriented for installation?

The unit is designed for side mounting to integrate on machine frames or control assemblies where lateral actuation is required.

What conduit size is provided for cable entry?

The conduit entry accepts 13.5mm fittings to match common industrial threaded conduit systems.

Approvals

UL, CSA.