Honeywell SSCE Series Plunger Limit Switch, SPDT, IP68, Die Cast Zinc Housing, 600V ac, 6A

Subtotaal (1 eenheid)*

€ 214,38

(excl. BTW)

€ 259,40

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • Plus verzending 85 stuk(s) vanaf 27 april 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 +€ 214,38

*prijsindicatie

RS-stocknr.:
344-3595
Artikelnummer Distrelec:
136-30-225
Fabrikantnummer:
SSCEB31C
Fabrikant:
Honeywell
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Honeywell

Product Type

Limit Switch

Actuator Type

Plunger

IP Rating

IP68

Contact Configuration

SPDT

Housing Material

Die Cast Zinc

Contact Type

Snap Action

Terminal Type

Cable

Switching Current

6A

Series

SSCE

Switching DC Voltage

250V dc

Switching AC Voltage

600V ac

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

90°C

Width

40mm

Length

67mm

Depth

16mm

Standards/Approvals

CE Certified, EN 60947-5-1, IEC 60947-5-1

Hazardous Area Certification

NO

Operating Force

22.5N

Conduit Entry

M12

Mechanical Life

10000000Cycles

Land van herkomst:
GB

Honeywell SSCE Series Limit Switch, IP68, 6A Switching Current - SSCEB31C


This limit switch is a Compact mechanical device designed to detect linear motion and provide a snap-action electrical output for control circuits in industrial systems. Housed in die-cast zinc with IP68 ingress protection, it is intended for use where robust environmental sealing and straightforward actuator operation are required. The switch employs a plunger actuator and provides a changeover contact arrangement suitable for integration into automation, electrical control and mechanical interlock applications.

Features and Benefits:


• SPDT contact gives selectable normally open or closed switching for control flexibility
• Snap-action contact behaviour supports fast, definitive state changes under load
• Rated for 6 A switching current to handle moderate control and load circuits
• Accepts up to 600V AC for compatibility with higher-voltage installations
• Operating range from -40°C to 90°C permits use in varied thermal conditions
• Mechanical endurance of 10,000,000 cycles reduces maintenance intervention

Applications


• Suitable for position sensing on industrial conveyors and actuators
• Ideal for limit detection on packaging and material-handling equipment
• Used for safety interlocks on access panels and guards
• Can be used for end-of-travel signalling in pneumatic cylinder systems
• Suitable for control feedback in motorised valve and gearbox assemblies

What type of cable entry does this switch accept?


It uses an M12 conduit entry, enabling a sealed connection to standard M12 cable glands and conduits for protected wiring.

How does the enclosure material affect installation?


The die-cast zinc housing provides mechanical robustness and dimensional stability for mounting in harsher environments while aiding electromagnetic screening.

What standards does the switch conform to for industrial electrical switching?


It meets EN 60947-5-1 and IEC 60947-5-1 requirements and carries CE certification for applicable directives.

How is the switching action achieved mechanically?


A plunger actuator mechanically drives an internal snap-action mechanism to create Rapid contact transfer and reliable signalling under dynamic conditions.

What Terminal arrangement is provided for wiring?


The device is supplied with cable termination rather than screw terminals, permitting direct connection of pre-assembled cables.

Approvals

UL, CSA.

Gerelateerde Links