Telemecanique Sensors XCMD Series Roller Plunger Limit Switch, 1 NO/1 NC, IP66, IP67, IP68, Zamak Housing, 50V ac, 3A

RS-stocknr.:: 609-6625
Fabrikantnummer:: XCMD2102C12
Fabrikant:: Telemecanique Sensors

Telemecanique Sensors XCMD Series Roller Plunger Limit Switch, 1 NO/1 NC, IP66, IP67, IP68, Zamak Housing, 50V ac, 3A

Momenteel niet beschikbaar

Sorry, we weten niet wanneer dit weer voorradig zal zijn.

RS-stocknr.:: 609-6625
Fabrikantnummer:: XCMD2102C12
Fabrikant:: Telemecanique Sensors

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Telemecanique Sensors
	Product Type	Limit Switch
	Actuator Type	Roller Plunger
	Contact Configuration	1 NO/1 NC
	IP Rating	IP66, IP67, IP68
	Housing Material	Zamak
	Contact Type	Snap Action
	Terminal Type	M12
	Switching Current	3A
	Series	XCMD
	Switching DC Voltage	50V dc
	Minimum Operating Temperature	-25°C
	Switching AC Voltage	50V ac
	Maximum Operating Temperature	70°C
	Depth	16mm
	Length	50mm
	Standards/Approvals	CCC, CSA, EN 60204-1, IEC 60204-1, UL
	Width	30mm
	Hazardous Area Certification	No
	Conduit Entry	M20
	Operating Force	7N
	Mechanical Life	10000000Cycles
	Mounting Orientation	Multi Directional

	Alles selecteren
	Merk Telemecanique Sensors
	Product Type Limit Switch
	Actuator Type Roller Plunger
	Contact Configuration 1 NO/1 NC
	IP Rating IP66, IP67, IP68
	Housing Material Zamak
	Contact Type Snap Action
	Terminal Type M12
	Switching Current 3A
	Series XCMD
	Switching DC Voltage 50V dc
	Minimum Operating Temperature -25°C
	Switching AC Voltage 50V ac
	Maximum Operating Temperature 70°C
	Depth 16mm
	Length 50mm
	Standards/Approvals CCC, CSA, EN 60204-1, IEC 60204-1, UL
	Width 30mm
	Hazardous Area Certification No
	Conduit Entry M20
	Operating Force 7N
	Mechanical Life 10000000Cycles
	Mounting Orientation Multi Directional

Land van herkomst:: ID

Telemecanique Sensors XCMD Series Limit Switch, Roller Plunger Actuator, 1NO/1NC Contact Configuration - XCMD2102C12

This limit switch provides position-sensing control for industrial automation and machinery. It uses a roller plunger actuator to detect linear movement and translates that motion into reliable electrical switching. The enclosure resists ingress from dust and water, making it suitable for demanding environments where robust signal switching is required.

Features and Benefits:

• Snap action contacts deliver quick state change and reduced contact bounce
• 1NO1NC arrangement supports both make and break signalling
• 7N operating force enables precise actuation response
• 3A current rating at 50V provides modest power switching capacity
• M12 terminals with M20 conduit entry simplify field wiring
• Rated to 10,000,000 mechanical cycles for extended operational life

Applications

• Suitable for end-of-travel detection on conveyor systems
• Ideal for position sensing on assembly-line machinery
• Used with packaging equipment requiring waterproof sensors
• Can be used for limit detection in test rigs and jigs

What materials protect the switch in harsh industrial settings?

The body is formed from a die-cast zinc alloy, providing mechanical strength and corrosion resistance while allowing Compact construction.

Which environmental ratings indicate suitability for wet locations?

The device carries IP66, IP67 and IP68 classifications, enabling protection against powerful jets, temporary immersion and continuous immersion respectively.

How does the switch cope with temperature extremes during operation?

It operates across a temperature range from -25°C up to a maximum of 70°C, covering most indoor and sheltered outdoor industrial applications.

What approvals cover its use in regulated installations?

It meets multiple standards and approvals including CCC, CSA, EN 60204-1, IEC 60204-1 and UL for recognised safety and performance criteria.