Telemecanique Sensors XCSD Series Roller Plunger Interlock Switch, 1 NO/2 NC, IP67, IP66, Metal Housing, 240V ac, 1.5A
- RS-stocknr.:
- 766-1615
- Fabrikantnummer:
- XCSD3902P20
- Fabrikant:
- Telemecanique Sensors
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 79,08
(excl. BTW)
€ 95,69
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Beperkte voorraad
- Plus verzending 8 stuk(s) vanaf 04 mei 2026
- Plus verzending 47 stuk(s) vanaf 04 mei 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 9 | € 79,08 |
| 10 - 14 | € 75,86 |
| 15 + | € 72,56 |
*prijsindicatie
- RS-stocknr.:
- 766-1615
- Fabrikantnummer:
- XCSD3902P20
- Fabrikant:
- Telemecanique Sensors
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Telemecanique Sensors | |
| Product Type | Interlock Switch | |
| Actuator Type | Roller Plunger | |
| IP Rating | IP67, IP66 | |
| Contact Configuration | 1 NO/2 NC | |
| Housing Material | Metal | |
| Contact Type | Snap Action | |
| Terminal Type | Cable | |
| Switching Current | 1.5A | |
| Series | XCSD | |
| Switching DC Voltage | 250V dc | |
| Switching AC Voltage | 240V ac | |
| Minimum Operating Temperature | -25°C | |
| Maximum Operating Temperature | 70°C | |
| Depth | 35mm | |
| Length | 100mm | |
| Standards/Approvals | UL, RoHS, IEC, EN, CSA, CE | |
| Width | 34mm | |
| Hazardous Area Certification | NO | |
| Mechanical Life | 10000000Cycles | |
| Conduit Entry | M20 x 1.5 | |
| Operating Force | 12N | |
| Alles selecteren | ||
|---|---|---|
Merk Telemecanique Sensors | ||
Product Type Interlock Switch | ||
Actuator Type Roller Plunger | ||
IP Rating IP67, IP66 | ||
Contact Configuration 1 NO/2 NC | ||
Housing Material Metal | ||
Contact Type Snap Action | ||
Terminal Type Cable | ||
Switching Current 1.5A | ||
Series XCSD | ||
Switching DC Voltage 250V dc | ||
Switching AC Voltage 240V ac | ||
Minimum Operating Temperature -25°C | ||
Maximum Operating Temperature 70°C | ||
Depth 35mm | ||
Length 100mm | ||
Standards/Approvals UL, RoHS, IEC, EN, CSA, CE | ||
Width 34mm | ||
Hazardous Area Certification NO | ||
Mechanical Life 10000000Cycles | ||
Conduit Entry M20 x 1.5 | ||
Operating Force 12N | ||
Telemecanique Sensors Safety Limit Switch
The Telemecanique Sensors XCSD series safety limit switch has a roller plunger lever actuator and 3 contacts. This switch has 1NO/2NC contact with screw connection. This switch is designed for monitoring access doors and/or guards on machines with low inertia and also on machines with high inertia, when used in conjunction with an actuator operated guard switches. When used on their own they are always installed in positive mode but if combined in pairs then one switch is in positive mode and the other switch is in negative mode.
Note:
With an appropriate monitoring system and correctly wired, this switch can reach safety category 4, conforming to EN/ISO 13849-1, PL e conforming to EN/ISO 13849-1, SIL 3 conforming to EN/IEC 61508.
Features and Benefits
Snap action operation
Red metal housing
Plastic protective cover, secured by 5-lobe socket head safety screw
Head on the rotary movement switch (lever) is adjustable in 15° steps throughout 360°
Linear movement switch (plunger) has an on-end approach only
Minimum mechanical life of 10000000 cycles
Cable composition is 1 entry tapped M20 x 1.5
Certifications
IP66 rated
IP67 rated
EN/ISO13849-1
EN1088/ISO14119
EN/IEC60204-1
EN/IEC60947-5-1
UL508
approved
CSAC22.2 No 14 certified
CE certified