Ewellix Makers in Motion LBBR 10 Bearing with 10 mm ID 17 mm OD 585 N 415 N
- RS-stocknr.:
- 284-8999
- Fabrikantnummer:
- LBBR 10
- Fabrikant:
- Ewellix Makers in Motion
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 26,74
(excl. BTW)
€ 32,36
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 65 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 26,74 |
| 5 - 9 | € 25,67 |
| 10 + | € 25,14 |
*prijsindicatie
- RS-stocknr.:
- 284-8999
- Fabrikantnummer:
- LBBR 10
- Fabrikant:
- Ewellix Makers in Motion
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Ewellix Makers in Motion | |
| Product Type | Bearing | |
| Outside Diameter | 17 mm | |
| Length | 26mm | |
| Inside Diameter | 10 mm | |
| End Type | Shielded | |
| Dynamic Load Rating | 585N | |
| Material | Steel | |
| Closure Type | Closed | |
| Base to Bore Centerline | 8.5mm | |
| Static Load Rating | 415N | |
| Standards/Approvals | No | |
| Series | LBBR | |
| Alles selecteren | ||
|---|---|---|
Merk Ewellix Makers in Motion | ||
Product Type Bearing | ||
Outside Diameter 17 mm | ||
Length 26mm | ||
Inside Diameter 10 mm | ||
End Type Shielded | ||
Dynamic Load Rating 585N | ||
Material Steel | ||
Closure Type Closed | ||
Base to Bore Centerline 8.5mm | ||
Static Load Rating 415N | ||
Standards/Approvals No | ||
Series LBBR | ||
N.v.t.
- Land van herkomst:
- DE
LBBR Ball Bushings Without Seals - Closed
Conforms to Series 1 of ISO10285
Unsealed bearing is fitted with a non contacting shield to exclude coarse debris
SKF Linear Ball Bushings & Sets
Closed ball bushings and plain bearings for XY positioning, pick and place applications and precision linear motion systems.,Plain bearings to be used in heavy shock, vibration, high acceleration or high speed situations which are unsuitable for linear ball bearings.,Note that higher frictional forces must be expected with linear plain bearings.,Ball bushings comprise a cage, in which the balls are guided, along with the raceway segments and integral seals,Further axial securing is often unnecessary when linear ball bearings and linear plain bearings are pressed into a J7 or J6 tolerance hole.
Gerelateerde Links
- Ewellix Makers in Motion LBBR 10-2LS Bearing with 10 mm ID 17 mm OD 585 N 415 N
- Ewellix Makers in Motion LBBR 10/HV6 Bearing with 10 mm ID 17 mm OD 585 N 415 N
- Ewellix Makers in Motion LBBR 10-2LS/HV6 Bearing with 10 mm ID 17 mm OD 585 N 415 N
- Ewellix Makers in Motion LBBR 5-C004 Bearing with 5 mm ID 10 mm OD 170 N 129 N
- Ewellix Makers in Motion LBBR 30 Bearing with 30 mm ID 40 mm OD 3150 N 2700 N
- Ewellix Makers in Motion LBBR 20 Bearing with 20 mm ID 28 mm OD 1160 N 800 N
- Ewellix Makers in Motion LBBR 12 Bearing with 12 mm ID 19 mm OD 695 N 510 N
- Ewellix Makers in Motion LBBR 25 Bearing with 25 mm ID 35 mm OD 2120 N 1560 N