Honeywell Pin Plunger Micro Switch, Solder Terminal, 5 A, 250 V ac, SPCO

This micro switch is a Compact electromechanical contact device designed for precise switching in demanding industrial environments. It provides a single-pole changeover contact arrangement and is suited to control and sensing tasks where reliable make/break performance at moderate currents is required. The unit is constructed for through-boarding and solder attachment and is commonly used where a small form factor and defined actuation behaviour are needed.

• Rated for 5A switching to handle moderate load currents
• Withstands AC mains up to 250V for broad system compatibility
• Actuated by a pin plunger for accurate point actuation
• Solder terminals allow secure PCB or wiring connections
• Operating force of 1.39N for predictable trigger response
• Engineered for 10 million mechanical operations to reduce downtime

• Suitable for limit switching in automation assemblies
• Ideal for control panels requiring Compact switching elements
• Used for position sensing in electromechanical actuators
• Can be used for manual Interface switches on equipment

The device is rated to perform at temperatures up to 121°C and down to -121°C, enabling use in elevated-temperature assemblies and cold-room equipment.

The enclosure is manufactured from phenolic material, chosen for its electrical insulating properties and dimensional stability.

It implements a single-pole changeover contact configuration, permitting one input to be routed to two different outputs depending on actuator position.

Certification coverage includes RoHS compliance along with recognised safety approvals from UL, CSA, ENEC and CE for regulatory alignment.

The component presents a Compact footprint measuring 20.3mm in length and 6.35mm in width suitable for space-constrained boards.