Honeywell Pin Plunger Micro Switch, Solder Terminal, 7 A, 250 V ac, SPCO

RS-stocknr.:: 820-7410
Fabrikantnummer:: 21SX39-T
Fabrikant:: Honeywell

Honeywell Pin Plunger Micro Switch, Solder Terminal, 7 A, 250 V ac, SPCO

Bulkkorting beschikbaar

Subtotaal (1 eenheid)*

€ 46,82

(excl. BTW)

€ 56,65

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 75,00

Op voorraad

Plus verzending 40 stuk(s) vanaf 23 maart 2026
Plus verzending 241 stuk(s) vanaf 23 maart 2026
Plus verzending 250 stuk(s) vanaf 30 maart 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 - 9	€ 46,82
10 - 24	€ 44,99
25 - 49	€ 43,31
50 - 99	€ 41,76
100 +	€ 40,31

*prijsindicatie

RS-stocknr.:: 820-7410
Fabrikantnummer:: 21SX39-T
Fabrikant:: Honeywell

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Honeywell
	Product Type	Micro Switch
	Actuator Type	Pin Plunger
	Terminal Type	Solder
	Contact Configuration	SPCO
	Housing Material	Phenolic
	Operating Force	1.39N
	Minimum Operating Temperature	-54°C
	Maximum Operating Temperature	121°C
	Contact AC Voltage	250V ac
	Microswitch Type	Subminiature
	Depth	8.9mm
	Standards/Approvals	CE, CSA, RoHS, UL
	Hazardous Area Certification	No
	Mechanical Life	10000000Operations
	Length	12.7mm
	Series	SX

	Alles selecteren
	Merk Honeywell
	Product Type Micro Switch
	Actuator Type Pin Plunger
	Terminal Type Solder
	Contact Configuration SPCO
	Housing Material Phenolic
	Operating Force 1.39N
	Minimum Operating Temperature -54°C
	Maximum Operating Temperature 121°C
	Contact AC Voltage 250V ac
	Microswitch Type Subminiature
	Depth 8.9mm
	Standards/Approvals CE, CSA, RoHS, UL
	Hazardous Area Certification No
	Mechanical Life 10000000Operations
	Length 12.7mm
	Series SX

Land van herkomst:: MX

Honeywell Series SX Micro Switch, 1.39N Operating Force, 250V Contact AC Voltage - 21SX39-T

This micro switch is a Compact electromechanical switch designed for precise switching in control and sensing assemblies within industrial environments. It delivers single-pole changeover switching suitable for signal routing and load control, with a pin plunger actuator that provides direct mechanical actuation for limit detection and user-interface inputs.

Features and Benefits:

• SPCO contact arrangement for versatile circuit switching
• 250V AC contact rating supports mains-level applications
• 7A switching current enables moderate load control
• 1.39N actuation force for consistent tactile response
• Phenolic housing offers electrical insulation and dimensional stability
• Mechanical endurance to 10 million operations for long service life

Applications

• Suitable for end-of-travel detection in automation equipment
• Ideal for control panels requiring tactile limit inputs
• Used for safety interlocks in electrical enclosures
• Can be used for position sensing in mechanical assemblies

What Terminal type does it use for connections?

Electrical connections are MADE via solder terminals that permit secure, low-profile wiring in Compact assemblies.

What temperature conditions can it tolerate during operation?

The switch is rated to operate up to 121°C and down to -121°C for use in elevated and sub-zero temperature environments.

How small is the switch for space-constrained designs?

The device has a width of 6.35mm and a length of 20.3mm, allowing integration where footprint is limited.

What approvals support its use in regulated installations?

It carries CE, CSA, RoHS and UL approvals suitable for many international compliance needs.