Omron Monitoring Relay, 1 Phase, SPDT, DIN Rail, 2mA to 500mA, 24 V dc, 240V ac

RS-stocknr.:: 111-3087
Fabrikantnummer:: K8DT-AS1CA
Fabrikant:: Omron

Omron Monitoring Relay, 1 Phase, SPDT, DIN Rail, 2mA to 500mA, 24 V dc, 240V ac

Subtotaal (1 eenheid)*

€ 118,07

(excl. BTW)

€ 142,86

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

Plus verzending 6 stuk(s) vanaf 31 juli 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 118,07

*prijsindicatie

RS-stocknr.:: 111-3087
Fabrikantnummer:: K8DT-AS1CA
Fabrikant:: Omron

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Omron
	Product Type	Monitoring Relay
	Electrical Phase	1
	Contact Configuration	SPDT
	Mount Type	DIN Rail
	Minimum Current Sensed	2mA
	Power Consumption	2.5VA
	Maximum Current Sensed	500mA
	Current Sensitivity	Overcurrent, Undercurrent
	Terminal Type	Push-in
	IP Rating	IP20
	Time Delay	250 ms
	Minimum Operating Temperature	-20°C
	Supply DC Voltage	24 V dc
	Supply AC Voltage	240V ac
	Relay Contact Current	5A
	Maximum Operating Temperature	60°C
	Standards/Approvals	RoHS, UL 60947-5-1, EN 60947-5-1
	Width	17.5mm
	Length	90mm
	Series	K8DT-AS
	Height	90mm

	Alles selecteren
	Merk Omron
	Product Type Monitoring Relay
	Electrical Phase 1
	Contact Configuration SPDT
	Mount Type DIN Rail
	Minimum Current Sensed 2mA
	Power Consumption 2.5VA
	Maximum Current Sensed 500mA
	Current Sensitivity Overcurrent, Undercurrent
	Terminal Type Push-in
	IP Rating IP20
	Time Delay 250 ms
	Minimum Operating Temperature -20°C
	Supply DC Voltage 24 V dc
	Supply AC Voltage 240V ac
	Relay Contact Current 5A
	Maximum Operating Temperature 60°C
	Standards/Approvals RoHS, UL 60947-5-1, EN 60947-5-1
	Width 17.5mm
	Length 90mm
	Series K8DT-AS
	Height 90mm

English Datasheet

Land van herkomst:: CN

Omron K8DT-AS Series Monitoring Relay, 100 to 240V AC Supply Voltage, 5A Relay Contact Current - K8DT-AS1CA

This monitoring relay provides continuous current surveillance for single-phase systems, detecting both overcurrent and undercurrent conditions to support motor and equipment protection. It accepts universal AC supply voltages or a dedicated DC supply and is designed for DIN-rail mounting in control panels and switchgear.

Features and Benefits:

• Adjustable sensing range 2mA-500mA for precise detection
• Single-pole changeover contact rated 5A for load switching
• 250ms timing delay to prevent nuisance trips from transients
• Works from 100-240V AC or 24V DC supply for installation flexibility
• Push-in terminals for Faster wiring and secure connections
• Low power consumption 2.5VA to minimise auxiliary loading

Applications

• Suitable for protecting motors against phase-loss and stall conditions
• Ideal for integration into automated control panels on DIN rail
• Used for monitoring current in industrial pump assemblies
• Can be used for fault detection in conveyor drive systems
• Used with single-phase distribution circuits in machinery

What environmental temperatures can it operate within?

It is specified to function between -20°C and 60°C, enabling use in typical factory and plant environments.

How is the device mounted and connected in assemblies?

It clips onto a DIN rail and uses push-in terminals for direct conductor insertion without additional connectors.

What mechanical protection does the enclosure provide?

The unit has IP20 ingress protection, suitable for enclosed panels but not for direct exposure to liquids.

What standards approvals does it meet for electrical safety?

It complies with EN 60947-5-1 and UL 60947-5-1 and meets RoHS requirements.

How many electrical phases does it monitor and what contact configuration is provided?

It monitors a single electrical phase and provides an SPDT contact arrangement for signalling or control.

Note

K8DT-AS allow use in either overcurrent or undercurrent mode.
K8DT-AW allow overcurrent and undercurrent monitoring simultaneously

Standards

EN 60947-5-1, UL 60947-5-1, IP 20 Terminals