Omron Monitoring Relay, 1 Phase, SPDT, DIN Rail, 0.1A to 5A, 0V ac

RS-stocknr.:: 111-3103
Fabrikantnummer:: K8DT-AW2CA
Fabrikant:: Omron

Omron Monitoring Relay, 1 Phase, SPDT, DIN Rail, 0.1A to 5A, 0V ac

Subtotaal (1 eenheid)*

€ 158,47

(excl. BTW)

€ 191,75

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

1 stuk(s) klaar voor verzending vanaf een andere locatie
Plus verzending 3 stuk(s) vanaf 08 september 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 158,47

*prijsindicatie

RS-stocknr.:: 111-3103
Fabrikantnummer:: K8DT-AW2CA
Fabrikant:: Omron

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Omron
	Product Type	Monitoring Relay
	Electrical Phase	1
	Contact Configuration	SPDT
	Mount Type	DIN Rail
	Minimum Current Sensed	0.1A
	Power Consumption	2.5VA
	Maximum Current Sensed	5A
	Current Sensitivity	Undercurrent, Overcurrent
	Terminal Type	Push-in
	Time Delay	250 ms
	IP Rating	IP20
	Minimum Operating Temperature	-20°C
	Relay Contact Current	0.1, 5mA
	Supply AC Voltage	0V ac
	Maximum Operating Temperature	60°C
	Series	K8DT-AW
	Standards/Approvals	RoHS, UL 60947-5-1, EN 60947-5-1
	Length	90mm
	Height	90mm
	Width	17.5mm

	Alles selecteren
	Merk Omron
	Product Type Monitoring Relay
	Electrical Phase 1
	Contact Configuration SPDT
	Mount Type DIN Rail
	Minimum Current Sensed 0.1A
	Power Consumption 2.5VA
	Maximum Current Sensed 5A
	Current Sensitivity Undercurrent, Overcurrent
	Terminal Type Push-in
	Time Delay 250 ms
	IP Rating IP20
	Minimum Operating Temperature -20°C
	Relay Contact Current 0.1, 5mA
	Supply AC Voltage 0V ac
	Maximum Operating Temperature 60°C
	Series K8DT-AW
	Standards/Approvals RoHS, UL 60947-5-1, EN 60947-5-1
	Length 90mm
	Height 90mm
	Width 17.5mm

English Datasheet

Land van herkomst:: CN

Omron K8DT-AW Series Monitoring Relay, 100 to 240V Supply AC Voltage, 0.1A Minimum Current Sensed - K8DT-AW2CA

This monitoring relay provides electrical phase monitoring and current sensing for single-phase control systems, protecting equipment by detecting both undercurrent and overcurrent conditions. It accepts a wide supply range and is designed for DIN-rail mounting in industrial control panels, offering a Compact footprint for space-constrained installations.

Features and Benefits:

• Detects 0.1A to 5A ranges to protect motor loads • SPDT contact offers simple changeover switching capability • 100-240V supply supports flexible power sources • 250ms time delay prevents nuisance tripping during transients • Push-in terminals enable Rapid wiring and serviceability • Power consumption 2.5VA minimises panel loading

Applications

• Suitable for monitoring motor supply current in conveyor systems • Ideal for detecting phase-related faults in pump control cabinets • Used with manufacturing machinery for load-loss detection • Can be used for preventative alarm signalling in HVAC panels

What contact switching currents can I expect for control signalling?

The relay provides switching capability at very low currents for signalling, specified down to 0.1mA and up to 5mA for relay contact current.

How does the device cope with temperature variations in plant rooms?

It is rated to operate between -20°C and 60°C, allowing use across typical industrial temperature ranges.

What mounting and enclosure protection does it require?

It is intended for DIN-rail mounting and has an IP20 rating, so it should be installed within an appropriate control enclosure to ensure ingress protection.

Which standards govern its safety and environmental compliance?

It conforms to RoHS and meets UL 60947-5-1 and EN 60947-5-1 requirements for control-device performance.

How large is the unit for panel planning?

The relay occupies a slim profile of 17.5mm width and a Compact overall size of 90x17.5x90mm for dense cabinet layouts.

Note

K8DT-AS allow use in either overcurrent or undercurrent mode.
K8DT-AW allow overcurrent and undercurrent monitoring simultaneously

Standards

EN 60947-5-1, UL 60947-5-1, IP 20 Terminals