Schneider Electric Monitoring Relay, DPDT, Flush, 440V ac 440 V dc
- RS-stocknr.:
- 272-7466
- Fabrikantnummer:
- IMD-IM400C
- Fabrikant:
- Schneider Electric
Subtotaal (1 eenheid)*
€ 4.921,61
(excl. BTW)
€ 5.955,15
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 21 september 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 4.921,61 |
*prijsindicatie
- RS-stocknr.:
- 272-7466
- Fabrikantnummer:
- IMD-IM400C
- Fabrikant:
- Schneider Electric
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Schneider Electric | |
| Product Type | Monitoring Relay | |
| Contact Configuration | DPDT | |
| Mount Type | Flush | |
| Power Consumption | 25VA | |
| Terminal Type | Screw | |
| IP Rating | IP20, IP54 | |
| Supply AC Voltage | 440V ac | |
| Maximum Insulation Resistance | 10mΩ | |
| Minimum Operating Temperature | -25°C | |
| Supply DC Voltage | 440 V dc | |
| Minimum Insulation Resistance | 10Ω | |
| Maximum Operating Temperature | 55°C | |
| Height | 123mm | |
| Length | 123mm | |
| Standards/Approvals | IEC 61010-1 | |
| Width | 159mm | |
| Series | Vigilohm | |
| Alles selecteren | ||
|---|---|---|
Merk Schneider Electric | ||
Product Type Monitoring Relay | ||
Contact Configuration DPDT | ||
Mount Type Flush | ||
Power Consumption 25VA | ||
Terminal Type Screw | ||
IP Rating IP20, IP54 | ||
Supply AC Voltage 440V ac | ||
Maximum Insulation Resistance 10mΩ | ||
Minimum Operating Temperature -25°C | ||
Supply DC Voltage 440 V dc | ||
Minimum Insulation Resistance 10Ω | ||
Maximum Operating Temperature 55°C | ||
Height 123mm | ||
Length 123mm | ||
Standards/Approvals IEC 61010-1 | ||
Width 159mm | ||
Series Vigilohm | ||
- Land van herkomst:
- IN
The Schneider Electric device belongs to the vigil ohm range designed to monitor ungrounded, IT electrical networks, in accordance to installation and products standards. It measures the system insulation resistance by injecting a low frequency AC current between the network and ground.
Auto-test
HMI screen
Protection is IP52 and rear IP20
RS485 communication port
Modbus protocol
Gerelateerde Links
- Schneider Electric Phase/Voltage Monitoring Relays SPDT 440V ac 440 V dc
- Schneider Electric Monitoring Relay SPDT 110V ac, 230 V ac 250 V dc
- Schneider Electric Monitoring Relay Flush 48 V dc, 24V ac
- Schneider Electric Monitoring Relay, DIN Rail
- Schneider Electric Monitoring Relay, Flush
- ABB Monitoring Relay 208/440 V ac Monitor Range DIN Rail, 440V ac
- Schneider Electric Insulation Tester, Flush
- Hiquel Monitoring Relay 150/440 V Monitor Range DIN Rail 180 V ac 550 V ac