Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Nexperia
	Logic Family	74HC
	Product Type	Dual Monostable Multivibrator
	Number of Elements per Chip	2
	Maximum High Level Output Current	-5.2mA
	Maximum Low Level Output Current	5.2mA
	Minimum Pulse Width	26ns
	Maximum Quiescent Current	160μA
	Mount Type	Surface
	Minimum Supply Voltage	2V
	Maximum Supply Voltage	6V
	Package Type	TSSOP
	Multivibrator Type	Monostable Multivibrator
	Maximum Propagation Delay Time @ CL	80ns
	Minimum Operating Temperature	-40°C
	Pin Count	16
	Maximum Operating Temperature	125°C
	Series	74HC
	Standards/Approvals	JEDEC No. 7A
	Length	5.1mm
	Width	4.5 mm
	Height	0.95mm
	Automotive Standard	AEC-Q101

	Alles selecteren
	Merk Nexperia
	Logic Family 74HC
	Product Type Dual Monostable Multivibrator
	Number of Elements per Chip 2
	Maximum High Level Output Current -5.2mA
	Maximum Low Level Output Current 5.2mA
	Minimum Pulse Width 26ns
	Maximum Quiescent Current 160μA
	Mount Type Surface
	Minimum Supply Voltage 2V
	Maximum Supply Voltage 6V
	Package Type TSSOP
	Multivibrator Type Monostable Multivibrator
	Maximum Propagation Delay Time @ CL 80ns
	Minimum Operating Temperature -40°C
	Pin Count 16
	Maximum Operating Temperature 125°C
	Series 74HC
	Standards/Approvals JEDEC No. 7A
	Length 5.1mm
	Width 4.5 mm
	Height 0.95mm
	Automotive Standard AEC-Q101

Dual retriggerable monostable multivibrator with reset, The 74HC123-Q100, 74HCT123-Q100 are high-speed Si-gate CMOS devices and are pin compatible with Low-power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The 74HC123-Q100, 74HCT123-Q100 are dual retriggerable monostable multivibrators with output Pulse width control by three methods, The Basic Pulse is defined by the selection of the external resistor (REXT) and capacitor (CEXT). Once triggered, the Basic output Pulse width may be extended by retriggering the gated Active LOW-going edge input (nA) or the Active HIGH-going edge input (nB).

Automotive product qualification in accordance with AEC-Q100 (Grade 1)

DC triggered from Active HIGH or Active LOW inputs

Retriggerable for very long pulses up to 100 % duty factor

Direct reset terminates output Pulse

Schmitt trigger action on all inputs except for the reset input

Nexperia, 2 Dual Monostable Multivibrator 74HC 5.2 mA, 16-Pin TSSOP