Vishay IRFR9014 Type P-Channel Power MOSFET, -5.1 A, -60 V, 3-Pin TO-252 IRFR9014PBF

RS-stocknr.:: 256-7312
Fabrikantnummer:: IRFR9014PBF
Fabrikant:: Vishay

Vishay IRFR9014 Type P-Channel Power MOSFET, -5.1 A, -60 V, 3-Pin TO-252 IRFR9014PBF

Subtotaal (1 tube van 75 eenheden)*

€ 27,45

(excl. BTW)

€ 33,225

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

2.775 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk	Per tube*
75 +	€ 0,366	€ 27,45

*prijsindicatie

RS-stocknr.:: 256-7312
Fabrikantnummer:: IRFR9014PBF
Fabrikant:: Vishay

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Vishay
	Channel Type	Type P
	Product Type	Power MOSFET
	Maximum Continuous Drain Current Id	-5.1A
	Maximum Drain Source Voltage Vds	-60V
	Package Type	TO-252
	Series	IRFR9014
	Mount Type	Surface
	Pin Count	3
	Maximum Drain Source Resistance Rds	0.5Ω
	Maximum Power Dissipation Pd	25W
	Maximum Gate Source Voltage Vgs	20V
	Minimum Operating Temperature	-55°C
	Typical Gate Charge Qg @ Vgs	12nC
	Forward Voltage Vf	-5.5V
	Maximum Operating Temperature	+150°C
	Standards/Approvals	RoHS
	Height	2.38mm
	Automotive Standard	No

	Alles selecteren
	Merk Vishay
	Channel Type Type P
	Product Type Power MOSFET
	Maximum Continuous Drain Current Id -5.1A
	Maximum Drain Source Voltage Vds -60V
	Package Type TO-252
	Series IRFR9014
	Mount Type Surface
	Pin Count 3
	Maximum Drain Source Resistance Rds 0.5Ω
	Maximum Power Dissipation Pd 25W
	Maximum Gate Source Voltage Vgs 20V
	Minimum Operating Temperature -55°C
	Typical Gate Charge Qg @ Vgs 12nC
	Forward Voltage Vf -5.5V
	Maximum Operating Temperature +150°C
	Standards/Approvals RoHS
	Height 2.38mm
	Automotive Standard No

Vishay IRFR9014 Series Power MOSFET, -60V Maximum Drain Source Voltage, 5.1A Maximum Continuous Drain Current - IRFR9014PBF

This power MOSFET is a P‑channel transistor designed for switching and power management in surface‑mounted electronics. It operates across a wide temperature range and suits compact assemblies where controlled gate drive and moderate current handling are required. The device is supplied in a TO‑252 package and conforms to RoHS directives.

Features and Benefits:

• 60V drain voltage supports medium‑voltage switching applications
• -5.1A continuous drain current enables moderate load handling
• 0.5Ω Rds(on) reduces conduction losses in low‑duty circuits
• 12nC typical gate charge allows faster gate switching
• 25W maximum power dissipation manages thermal loading in compact layouts
• ±20V gate tolerance provides flexibility in gate‑drive arrangements

Applications

• Suitable for reverse‑polarity protection in DC systems
• Ideal for small motor control and drive circuits
• Used with power distribution modules on compact assemblies
• Can be used for load switching in consumer electronics
• Appropriate for biasing and polarity switching in sensor arrays

What mounting method is required for reliable installation?

It is intended for surface mounting onto printed circuit boards using the three‑pin TO‑252 footprint with appropriate soldering profiles for thermal transfer.

How does it perform in elevated ambient temperatures?

The component is rated to operate up to +150°C junction, allowing use in high‑temperature environments with suitable thermal management.

What gate‑drive limits must be observed to avoid damage?

The gate‑to‑source voltage must not exceed ±20V under any operating condition to prevent gate oxide overstress.

Is this device specified for automotive‑standard qualification?

It is not designated as meeting automotive‑specific standards and should not be assumed to replace automotive‑graded components.