RS PRO WDG Series Incremental Incremental Encoder 30V dc, 1024 ppr ppr, HTL Inverted Signal, Solid Type, 10 mm Shaft
- RS-stocknr.:
- 795-1093
- Fabrikant:
- RS PRO
Afbeelding representeert productcategorie
Subtotaal (1 eenheid)*
€ 319,72
(excl. BTW)
€ 386,86
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- Plus verzending 4 stuk(s) vanaf 13 juli 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 319,72 |
*prijsindicatie
- RS-stocknr.:
- 795-1093
- Fabrikant:
- RS PRO
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | RS PRO | |
| Product Type | Incremental Encoder | |
| Encoder Technology | Incremental | |
| Pulses Per Revolution | 1024ppr | |
| Series | WDG | |
| Maximum Revolutions | 8000rpm | |
| Output Signal Type | HTL Inverted | |
| Shaft Type | Solid | |
| Shaft Diameter | 10mm | |
| Interface Type | Cable | |
| IP Rating | IP67 | |
| Terminal Type | 8-Pin | |
| Maximum Supply Voltage | 30V dc | |
| Minimum Operating Temperature | -20°C | |
| Overall Depth | 90mm | |
| Standards/Approvals | EN, CE | |
| Overall Height | 42mm | |
| Overall Width | 58mm | |
| Mount Type | Clamping Flange Mount | |
| Maximum Operating Temperature | 80°C | |
| Switching Frequency | 200kHz | |
| Alles selecteren | ||
|---|---|---|
Merk RS PRO | ||
Product Type Incremental Encoder | ||
Encoder Technology Incremental | ||
Pulses Per Revolution 1024ppr | ||
Series WDG | ||
Maximum Revolutions 8000rpm | ||
Output Signal Type HTL Inverted | ||
Shaft Type Solid | ||
Shaft Diameter 10mm | ||
Interface Type Cable | ||
IP Rating IP67 | ||
Terminal Type 8-Pin | ||
Maximum Supply Voltage 30V dc | ||
Minimum Operating Temperature -20°C | ||
Overall Depth 90mm | ||
Standards/Approvals EN, CE | ||
Overall Height 42mm | ||
Overall Width 58mm | ||
Mount Type Clamping Flange Mount | ||
Maximum Operating Temperature 80°C | ||
Switching Frequency 200kHz | ||
- Land van herkomst:
- DE
RS PRO Incremental Encoder 1024 PPR, Solid Shaft
Need to record rotations per minute (RPM), speed or distance in a high-speed rotating device? Use this RS PRO incremental encoder. The body is made of strong die-cast aluminium material, so you can use it for demanding industrial applications.
The cover has an Ingress Protection (IP) rating of IP67. This means it can withstand submersion in up to one metre of water for 30 minutes and is protected against dust. It can withstand high radial and axial loads for maximum durability. Its high PPR (pulses per revolution) of 1024 means it provides highly accurate readings.
For resistance to rust and corrosion, the unit is powder-coated. It's also a low-maintenance choice as its high electrical immunity means it's not susceptible to noise.
Features and Benefits
Gerelateerde Links
- RS PRO WDG Series Incremental Incremental Encoder 30V dc HTL Inverted Signal 10 mm Shaft
- RS PRO WDG Series Incremental Incremental Encoder 30V dc HTL Inverted Signal 6 mm Shaft
- RS PRO WDG Series Incremental Incremental Encoder 30V dc HTL Inverted Signal 12 mm Shaft
- Wachendorff WDG 24C Series Incremental Incremental Encoder 30V dc HTL Inverted Signal 6 mm
- RS PRO WDG Series Incremental Incremental Encoder 30V dc HTL Inverted Signal 6 mm Shaft
- RS PRO WDG Series Incremental Incremental Encoder 30V dc HTL Inverted Signal 6 mm Shaft
- RS PRO WDG Series Incremental Incremental Encoder 30V dc HTL Inverted Signal 6 mm Shaft
- RS PRO WDG Series Incremental Incremental Encoder 30V dc HTL Inverted Signal 10 mm Shaft