Honeywell Surface Hall Effect Sensor 2.2 V 5.5V, SOT-23, 3-Pin

RS-stocknr.:: 203-6952P
Fabrikantnummer:: SL353HT
Fabrikant:: Honeywell

Honeywell Surface Hall Effect Sensor 2.2 V 5.5V, SOT-23, 3-Pin

Bulkkorting beschikbaar

Bekijk bulkkorting

Subtotaal 50 eenheden (geleverd op een doorlopende strip)*

€ 48,30

(excl. BTW)

€ 58,45

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

1.430 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
50 - 90	€ 0,966
100 - 990	€ 0,89
1000 - 1490	€ 0,856
1500 +	€ 0,804

*prijsindicatie

RS-stocknr.:: 203-6952P
Fabrikantnummer:: SL353HT
Fabrikant:: Honeywell

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Honeywell
	Sensor Type	Hall Effect Sensors
	Product Type	Hall Effect Sensor
	Technology	Digital
	Mount Type	Surface
	Magnetic Type	Omnipolar
	Minimum Supply Voltage	2.2V
	Package Type	SOT-23
	Maximum Supply Voltage	5.5V
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	85°C
	Pin Count	3
	Height	1.2mm
	Length	2.9mm
	Standards/Approvals	RoHS
	Series	SL353
	Width	2.8mm
	Supply Current	2.5mA
	Automotive Standard	No

	Alles selecteren
	Merk Honeywell
	Sensor Type Hall Effect Sensors
	Product Type Hall Effect Sensor
	Technology Digital
	Mount Type Surface
	Magnetic Type Omnipolar
	Minimum Supply Voltage 2.2V
	Package Type SOT-23
	Maximum Supply Voltage 5.5V
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 85°C
	Pin Count 3
	Height 1.2mm
	Length 2.9mm
	Standards/Approvals RoHS
	Series SL353
	Width 2.8mm
	Supply Current 2.5mA
	Automotive Standard No

Land van herkomst:: CN

Honeywell SL353 Series Hall Effect Sensor, 5.5V Maximum Supply Voltage, 2.2V Minimum Supply Voltage - SL353HT

This Hall effect sensor is a Compact digital magnetic switch designed for surface mounting on PCBs, detecting magnetic fields with an omnipolar response. It operates across a low-voltage range and is intended for use in electronic and electromechanical control systems where small size and straightforward digital output are required.

Features and Benefits:

• Operates from 2.2V to 5.5V enabling flexible power supply choices
• Draws 2.5 mA supply current to conserve system power
• Works between -40°C and 85°C for wide environmental tolerance
• Omnipolar sensing detects either magnetic polarity for simplified alignment
• SOT-23, 3-pin surface package for dense PCB mounting

Applications

• Suitable for position sensing in Compact actuators
• Ideal for non-contact switching in automation panels
• Used for magnetic detection in motor control circuits
• Can be used for contactless limit sensing in machinery

What mounting approach does it require on a board?

It is supplied in a SOT-23 package with three pins intended for surface-mount assembly onto standard PCB pads.

How does the sensor behave in different magnetic orientations?

The omnipolar characteristic means it responds to both north and south pole exposures, removing the need for a specific magnet polarity during installation.

What are the device’s thermal constraints for integration?

The component is specified to function down to -40°C and up to 85°C, which should be considered when positioning near heat sources or in cold environments.

What electrical limits must be observed to prevent damage?

Do not exceed the maximum supply voltage of 5.5V and ensure the operating voltage remains above 2.2V for correct digital output.