Honeywell Surface Hall Effect Sensor 1.65 V 5.5 V, Push Pull, SOT-23, 3-Pin
- RS-stocknr.:
- 236-2719
- Fabrikantnummer:
- SM351LT
- Fabrikant:
- Honeywell
Subtotaal (1 rol van 3000 eenheden)*
€ 2.307,00
(excl. BTW)
€ 2.790,00
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks | Per stuk | Per rol* |
|---|---|---|
| 3000 + | € 0,769 | € 2.307,00 |
*prijsindicatie
- RS-stocknr.:
- 236-2719
- Fabrikantnummer:
- SM351LT
- Fabrikant:
- Honeywell
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Honeywell | |
| Sensor Type | Position Sensor | |
| Product Type | Hall Effect Sensor | |
| Technology | Magneto Resistive | |
| Mount Type | Surface | |
| Interface Type | Push Pull | |
| Magnetic Type | Omnipolar | |
| Minimum Supply Voltage | 1.65V | |
| Maximum Supply Voltage | 5.5V | |
| Package Type | SOT-23 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Pin Count | 3 | |
| Series | Nanopower | |
| Standards/Approvals | RoHS (Directive 2002/95/EC), ESD Class 2 | |
| Response Time | 15μs | |
| Automotive Standard | No | |
| Supply Current | 1mA | |
| Alles selecteren | ||
|---|---|---|
Merk Honeywell | ||
Sensor Type Position Sensor | ||
Product Type Hall Effect Sensor | ||
Technology Magneto Resistive | ||
Mount Type Surface | ||
Interface Type Push Pull | ||
Magnetic Type Omnipolar | ||
Minimum Supply Voltage 1.65V | ||
Maximum Supply Voltage 5.5V | ||
Package Type SOT-23 | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Pin Count 3 | ||
Series Nanopower | ||
Standards/Approvals RoHS (Directive 2002/95/EC), ESD Class 2 | ||
Response Time 15μs | ||
Automotive Standard No | ||
Supply Current 1mA | ||
- Land van herkomst:
- CN
The Honeywell Nanopower series magneto resistive (MR) sensor ICs are ultra-sensitive device designed to accommodate a wide range of applications with large air gaps, small magnetic field and low power requirements. The sensor ICs respond to either a north or south pole applied in a direction parallel to the sensor. They do not require the magnet polarity to be identified, simplifying installation and potentially reducing system cost. The sensor ICs use a very low average current consumption and a push-pull output which does not require a pull-up resistor. The sensor ICs can operate from a supply voltage as low as 1.65 V, promoting energy efficiency.
Temperature range -40 °C to 85 °C
Non-chopper stabilized design
High sensitivity
Gerelateerde Links
- Honeywell Surface Hall Effect Sensor 1.65 V 5.5 V SOT-23, 3-Pin
- Honeywell Surface Hall Effect Sensor 1.65 V 5.5 V 3-Pin
- Texas Instruments Surface Hall Effect Sensor 1.65 V 5.5 V 3-Pin
- Honeywell Surface Hall Effect Sensor 2.2 V 5.5 V 3-Pin
- Honeywell Hall Effect Sensors
- Honeywell Surface Hall Effect Sensor 3 V 26 V 3-Pin
- Honeywell Surface Hall Effect Sensor -28 V 28 V 3-Pin
- Honeywell Surface Hall Effect Sensor 3 V 24 V 3-Pin