Infineon Surface Hall Effect Sensor 3 V 32V, PG-SC-59-3, 3-Pin

RS-stocknr.:: 260-5893
Artikelnummer Distrelec:: 304-34-465
Fabrikantnummer:: TLE49643KXTSA1
Fabrikant:: Infineon

Infineon Surface Hall Effect Sensor 3 V 32V, PG-SC-59-3, 3-Pin

Subtotaal (1 verpakking van 10 eenheden)*

€ 2,94

(excl. BTW)

€ 3,56

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Tijdelijk niet op voorraad

Verzending 3.000 stuk(s) vanaf 17 december 2026
Plus verzending 3.000 stuk(s) vanaf 21 januari 2027

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk	Per verpakking*
10 +	€ 0,294	€ 2,94

*prijsindicatie

RS-stocknr.:: 260-5893
Artikelnummer Distrelec:: 304-34-465
Fabrikantnummer:: TLE49643KXTSA1
Fabrikant:: Infineon

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Infineon
	Product Type	Hall Effect Sensor
	Sensor Type	Hall Effect
	Technology	Sensor
	Mount Type	Surface
	Magnetic Type	Unipolar
	Maximum Frequency Response	10kHz
	Minimum Frequency Response	0kHz
	Minimum Supply Voltage	3V
	Package Type	PG-SC-59-3
	Maximum Supply Voltage	32V
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	170°C
	Pin Count	3
	Series	TLE
	Standards/Approvals	RoHS
	Automotive Standard	AEC-Q100
	Supply Current	1.6mA

	Alles selecteren
	Merk Infineon
	Product Type Hall Effect Sensor
	Sensor Type Hall Effect
	Technology Sensor
	Mount Type Surface
	Magnetic Type Unipolar
	Maximum Frequency Response 10kHz
	Minimum Frequency Response 0kHz
	Minimum Supply Voltage 3V
	Package Type PG-SC-59-3
	Maximum Supply Voltage 32V
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 170°C
	Pin Count 3
	Series TLE
	Standards/Approvals RoHS
	Automotive Standard AEC-Q100
	Supply Current 1.6mA

Datasheet - TLE49643KXTSA1

Infineon TLE Series Hall Effect Sensor, -40°C Minimum Operating Temperature, 32V Maximum Supply Voltage - TLE49643KXTSA1

This Hall-effect sensor is a three-pin surface-mount magnetic switch designed for detection of a unipolar magnetic field in automotive and industrial contexts. It operates from a low-voltage supply and is intended for use where Compact, low-current sensing is required across a wide temperature span. The component is offered in a Compact PG-SC-59-3 package and meets RoHS and automotive AEC-Q100 standards.

Features and Benefits:

• 3V to 32V supply range reduces power-system constraints
• 1.6mA supply current prolongs battery operation
• -40°C to 170°C rated temperature range extends deployment scope
• 0 to 10kHz frequency response supports varied signal rates
• 3-pin surface-mount reduces board footprint and assembly time

Applications

• Suitable for unipolar magnetic position sensing in vehicles
• Ideal for wheel-speed or gear-tooth detection systems
• Used with low-power control circuits in harsh temperatures
• Can be used for Compact sensor modules on PCBs

What magnetic polarity does it detect?

It responds to a unipolar magnetic field, switching on with one magnetic polarity.

How does the package affect PCB layout?

The PG-SC-59-3 surface-mount package allows close component placement and standard reflow assembly.

Is it suitable for automotive qualification processes?

It conforms to automotive AEC-Q100 requirements for use in vehicle electronics.

What environmental certification does it carry?

It is RoHS-compliant, restricting certain hazardous substances.

What pin count and mounting type are provided?

The device has three electrical pins and is specified for surface mounting.