ROHM BD6385EFV-E2, Stepper Motor Driver IC 40-Pin, HTSSOP
- RS-stocknr.:
- 171-6969
- Fabrikantnummer:
- BD6385EFV-E2
- Fabrikant:
- ROHM
Momenteel niet beschikbaar
We weten niet of dit item nog op voorraad komt, RS is van plan dit binnenkort uit ons assortiment te halen.
- RS-stocknr.:
- 171-6969
- Fabrikantnummer:
- BD6385EFV-E2
- Fabrikant:
- ROHM
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | ROHM | |
| Product Type | Motor Driver IC | |
| Motor Type | Stepper | |
| Configuration | Half Bridge | |
| Mount Type | Surface | |
| Package Type | HTSSOP | |
| Pin Count | 40 | |
| Output Current | 1.5A | |
| Minimum Supply Voltage | 10V | |
| Maximum Supply Voltage | 28V | |
| Minimum Operating Temperature | -25°C | |
| Maximum Operating Temperature | 75°C | |
| Length | 13.5mm | |
| Standards/Approvals | No | |
| Height | 1mm | |
| Series | BD6385EFV | |
| Inverter Power Rating | 4.7W | |
| Automotive Standard | No | |
| Supply Current | 10mA | |
| Alles selecteren | ||
|---|---|---|
Merk ROHM | ||
Product Type Motor Driver IC | ||
Motor Type Stepper | ||
Configuration Half Bridge | ||
Mount Type Surface | ||
Package Type HTSSOP | ||
Pin Count 40 | ||
Output Current 1.5A | ||
Minimum Supply Voltage 10V | ||
Maximum Supply Voltage 28V | ||
Minimum Operating Temperature -25°C | ||
Maximum Operating Temperature 75°C | ||
Length 13.5mm | ||
Standards/Approvals No | ||
Height 1mm | ||
Series BD6385EFV | ||
Inverter Power Rating 4.7W | ||
Automotive Standard No | ||
Supply Current 10mA | ||
- Land van herkomst:
- JP
This series is the high-grade type that provides the highest function and highest reliance in the ROHM stepping motor driver series. This series has the perfect various protection circuits and reduces IC's generation of heat by adopting low-ON resistance DMOS and high heat-radiation power package. As for its basic function, it is a low power consumption bipolar PWM constant current-drive driver with power supply's rated voltage of 36V and rated output current of 1.0A to 2.2A.
Low on-resistance DMOS, rated output current 1.5A
CLK-IN/PARALLEL-IN drive
QUARTER STEP
Applicable to the μSTEP drive
Power-saving function
TSD(Thermal Shutdown) circuit
OCP(Over Current Protection) circuit
UVLO(Under Voltage Locked Out) circuit
OVLO(Under Voltage Locked Out) circuit
Power ON reset function
Compact, thin-shape, and high heat dissipation package
Current decay mode selection(Mix decay)
One power supply system 36V