ROHM BD63621MUV-E2, Stepper Motor Driver IC 28-Pin, VQFN
- RS-stocknr.:
- 235-2571
- Fabrikantnummer:
- BD63621MUV-E2
- Fabrikant:
- ROHM
Subtotaal (1 verpakking van 5 eenheden)*
€ 16,19
(excl. BTW)
€ 19,59
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Laatste voorraad RS
- Laatste 5 stuk(s), klaar voor verzending vanaf een andere locatie
Aantal stuks | Per stuk | Per verpakking* |
|---|---|---|
| 5 + | € 3,238 | € 16,19 |
*prijsindicatie
- RS-stocknr.:
- 235-2571
- Fabrikantnummer:
- BD63621MUV-E2
- Fabrikant:
- ROHM
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | ROHM | |
| Product Type | Motor Driver IC | |
| Motor Type | Stepper | |
| Configuration | H Bridge | |
| Package Type | VQFN | |
| Pin Count | 28 | |
| Maximum Supply Voltage | 36V | |
| Alles selecteren | ||
|---|---|---|
Merk ROHM | ||
Product Type Motor Driver IC | ||
Motor Type Stepper | ||
Configuration H Bridge | ||
Package Type VQFN | ||
Pin Count 28 | ||
Maximum Supply Voltage 36V | ||
The ROHM bipolar low-consumption driver that driven by PWM current. Rated power supply voltage of the device is 36V, and rated output current is 2.0A. CLK-IN driving mode is adopted for input interface, and excitation mode is corresponding to FULL STEP mode, HALF STEP mode, QUARTER STEP mode via a built-in DAC. In terms of current decay, the FAST DECAY/SLOW DECAY ratio may be set without any limitation, and all available modes may be controlled in the most appropriate way. In addition, the power supply may be driven by one single system, which simplifies the design.
PWM constant current
Built-in spike noise cancel function
Normal rotation & reverse rotation switching function
Power save function
Built-in logic input pull-down resistor
Power-on reset function
Thermal shutdown circuit
Adjacent pins short protection