Toshiba TC78H670FTG(O,EL), Stepper Stepper Motor Driver 16-Pin, QFN
- RS-stocknr.:
- 214-8107
- Fabrikantnummer:
- TC78H670FTG(O,EL)
- Fabrikant:
- Toshiba
Subtotaal (4000 eenheden, op een rol van 4000)*
€ 4.048,00
(excl. BTW)
€ 4.900,00
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 03 mei 2027
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per rol* |
|---|---|---|
| 4000 + | € 1,012 | € 4.048,00 |
*prijsindicatie
- RS-stocknr.:
- 214-8107
- Fabrikantnummer:
- TC78H670FTG(O,EL)
- Fabrikant:
- Toshiba
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Toshiba | |
| Product Type | Stepper Motor Driver | |
| Motor Type | Stepper | |
| Configuration | Bipolar | |
| Mount Type | Surface | |
| Package Type | QFN | |
| Pin Count | 16 | |
| Output Current | 2A | |
| Minimum Supply Voltage | 2.5V | |
| Maximum Supply Voltage | 8V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Series | TC78H670FTG | |
| Standards/Approvals | RoHS | |
| Length | 3mm | |
| Height | 0.9mm | |
| Width | 3mm | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk Toshiba | ||
Product Type Stepper Motor Driver | ||
Motor Type Stepper | ||
Configuration Bipolar | ||
Mount Type Surface | ||
Package Type QFN | ||
Pin Count 16 | ||
Output Current 2A | ||
Minimum Supply Voltage 2.5V | ||
Maximum Supply Voltage 8V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Series TC78H670FTG | ||
Standards/Approvals RoHS | ||
Length 3mm | ||
Height 0.9mm | ||
Width 3mm | ||
Automotive Standard No | ||
The Toshiba serial controlled bipolar stepping motor driver is two-phase IC with a built-in clock-in decoder. This monolithic IC is fabricated with the BiCD process, and has output rating of 50 V/5.0 A. It incorporate DMOS with low on-resistance in output transistors.
Built-in Dual H Bridges, Capable of controlling 1 bipolar stepping motor
PWM controlled constant-current drive
Power supply operating voltage: 2.5 V to 16.0 V
Output current ratings: 2.0 A (max)
Low on-resistance (High + Low side = 0.48 Ω (typ.)) MOSFET output stage
Allows full, half, quarter, 1/8, 1/16, 1/32, 1/64, 1/128 step operation
Built-in Sense resistor less current control architecture (Advanced Current Detection System)
Multi error detect functions (Thermal shutdown (TSD), Over current (ISD), motor load open (OPD) and Under voltage lockout(UVLO))
Error detection (TSD/ISD/OPD) flag output function
Built-in VCC regulator for internal circuit
Chopping frequency of a motor can be adjusted by external resistor
Small QFN package with thermal pad (16pin)