Fluke Fluke 1663 Multifunction Tester 1kV Earth Resistance Measurement With IR USB, UKAS

RS-stocknr.:: 886-869
Fabrikantnummer:: 1663 UK/FEV300
Fabrikant:: Fluke

Fluke Fluke 1663 Multifunction Tester 1kV Earth Resistance Measurement With IR USB, UKAS

Momenteel niet beschikbaar

Sorry, we weten niet wanneer dit weer voorradig zal zijn.

RS-stocknr.:: 886-869
Fabrikantnummer:: 1663 UK/FEV300
Fabrikant:: Fluke

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Fluke
	Loop Impedance Test Type	High/Low Current
	Product Type	Multifunction Tester
	Automatic RCD Test	Yes
	RCD Ramp Test	Yes
	Model Number	Fluke 1663
	Non-Tripping	No
	Insulation Test Voltage	1kV
	Maximum Voltage Measurement	500V
	Test Type	Installation
	Earth Resistance Measurement	Yes
	Downloadable Data	Yes
	Interface Type	IR USB
	RCD Test Type	Type G, AC, Type S
	Weight	1.3kg
	Length	100mm
	Remote Switch Mode	Yes
	Standards/Approvals	ANSI/ISA -s82.02.01 and CAN/CSA c22.2 No. 1010, UL61010, Complies IEC/EN610101
	Height	125mm
	Width	250mm
	IP Rating	IP40
	Test Standards	IEC 60364, all relevant local Standard
	Minimum Continuity Resistance	20Ω
	Maximum Operating Temperature	40°C
	Maximum Continuity Resistance	2000Ω
	Battery Type	1.5V AA
	Minimum Operating Temperature	-20°C
	Safety Category Level	CAT IV 300 V, Philips
	Power Source	Battery
	Calibrated	UKAS

	Alles selecteren
	Merk Fluke
	Loop Impedance Test Type High/Low Current
	Product Type Multifunction Tester
	Automatic RCD Test Yes
	RCD Ramp Test Yes
	Model Number Fluke 1663
	Non-Tripping No
	Insulation Test Voltage 1kV
	Maximum Voltage Measurement 500V
	Test Type Installation
	Earth Resistance Measurement Yes
	Downloadable Data Yes
	Interface Type IR USB
	RCD Test Type Type G, AC, Type S
	Weight 1.3kg
	Length 100mm
	Remote Switch Mode Yes
	Standards/Approvals ANSI/ISA -s82.02.01 and CAN/CSA c22.2 No. 1010, UL61010, Complies IEC/EN610101
	Height 125mm
	Width 250mm
	IP Rating IP40
	Test Standards IEC 60364, all relevant local Standard
	Minimum Continuity Resistance 20Ω
	Maximum Operating Temperature 40°C
	Maximum Continuity Resistance 2000Ω
	Battery Type 1.5V AA
	Minimum Operating Temperature -20°C
	Safety Category Level CAT IV 300 V, Philips
	Power Source Battery
	Calibrated UKAS

Land van herkomst:: GB

Fluke Multifunction Tester, 500V Maximum Voltage Measurement, 1000V Insulation Test Voltage - 1663 UK/FEV300

This multifunction tester is a portable instrument for verifying electrical installations and protective devices in accordance with relevant standards. It performs insulation checks up to 1000V, continuity measurements, loop impedance and earth resistance assessments, and automated RCD testing, with data export capability via IR USB for reporting and audit purposes.

Features and Benefits:

• Measures insulation with 1000V for high-voltage integrity testing
• Continuity range to 2000 Ω for conductor verification
• Performs loop impedance high and low current for fault current assessment
• Executes RCD ramp and automatic tests for relay performance evaluation
• Earth resistance measurement function for earthing checks
• Battery powered using 1.5V AA cells for field mobility

Applications

• Suitable for on-site electrical installation verification to IEC 60364
• Ideal for RCD testing Type G AC Type S in domestic environments
• Used for loop impedance high and low current testing on distribution circuits
• Can be used for earth resistance meter tasks at earthing points
• Suitable for portable IR USB multifunction tester data collection

What safety rating applies when working near supply equipment?

The instrument is rated to CAT IV 300V which defines its safe use close to the origin of the low-voltage installation.

How does the tester handle temperature variations on site?

It operates between -20 °C and 40 °C, allowing use in varied environmental conditions without performance degradation.

What interfaces are available for transferring recorded measurements?

Measurement data can be exported using the built-in IR USB interface for subsequent analysis.

Which standards guide its installation testing routines?

Test methods conform to IEC 60364 and applicable local standards for installation verification.