Fluke 1663 Multifunction Tester 1000 V Earth Resistance Measurement With USB

Bekijk alle Multifunction Testers

Subtotaal (1 eenheid)*

€ 1.863,00

(excl. BTW)

€ 2.254,23

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks
Per stuk
1 +€ 1.863,00

*prijsindicatie

RS-stocknr.:
117-6666
Artikelnummer Distrelec:
300-60-460
Fabrikantnummer:
FLK-1663 SCH
Fabrikant:
Fluke
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Fluke

Loop Impedance Test Type

Phase to Neutral, Phase to Earth

Product Type

Multifunction Tester

Automatic RCD Test

Yes

RCD Ramp Test

Yes

Model Number

1663

Maximum Voltage Measurement

500V ac/dc

Test Type

Miniature GPS, Insulation Resistance, Voltage, Continuity, Phase Sequence Test, Frequency, Resistance, Wiring Polarity, MOSFET, RCD Test

Earth Resistance Measurement

Yes

Interface Type

USB

Continuity Test Current

10mA

RCD Test Type

Type S, Type G, AC

Height

125mm

Length

100mm

Remote Switch Mode

Yes

Weight

1.3kg

Standards/Approvals

ANSI/ISAs82.02.01 2000, CE, UL 61010, CSA, EN 610101 Ed 2.0 (200102)

IP Rating

IP40

Test Standards

EN 61557-7, EN 61557-10, EN 61557-1

Maximum Continuity Resistance

2000Ω

Safety Category Level

CAT III, CAT IV

Battery Type

AA

Display Type

LCD

Safety Category Voltage

500V

Minimum Continuity Resistance

20Ω

Power Source

Battery

Vrijgesteld

Land van herkomst:
GB

Fluke Multifunction Tester, 500V Maximum Voltage Measurement, 1000V Insulation Test Voltage - FLK-1663 SCH


This multifunction tester provides portable verification of electrical installations and protective devices for professionals in automation, electronics, electrical and mechanical fields. It combines insulation, continuity, voltage and RCD diagnostics with loop and earth resistance measurement in a handheld instrument designed for on-site commissioning and fault finding.

Features & Benefits


• Insulation resistance tester 1000V for high-voltage isolation checks
• Maximum voltage measurement 500V AC/DC for mains verification
• Continuity test current 1mA to assess conductor integrity safely
• Loop impedance phase to earth phase to NEUTRAL for accurate fault-loop assessment
• Automatic RCD test Plus RCD ramp and automatic test Type S Type G to validate protective devices
• USB multifunction electrical tester AA battery operation for data transfer and field portability

Applications


• Suitable for domestic and commercial circuit commissioning requiring loop impedance phase to earth phase to NEUTRAL
• Ideal for RCD selection and verification using RCD ramp and automatic test Type S Type G
• Used for insulation diagnosis where insulation resistance tester 1000V is required
• Can be used for maintenance checks involving continuity and voltage up to 500V AC/DC
• Used with earthing systems as a portable earth resistance metre Fluke for site surveys

What safety categories does it meet for use near distribution equipment?


It is rated for CAT III 500V and CAT IV 300V environments to permit connection close to distribution panels and certain supply-side equipment.

How does the instrument handle earth resistance measurements?


It performs dedicated earth resistance measurement routines suitable for assessing protective earth continuity and impedance on site.

What form factor and weight should I expect for fieldwork?


The instrument is a Compact handheld unit with a width of 250mm, height 125mm, length 100mm and weighs 1.3kg for handheld operation.

Which standards guide its test functionality and safety?


Test behaviour aligns with EN 61557 parts and safety follows standards including EN 61010 and relevant UL/CSA approvals.

Gerelateerde Links