Fluke 1664 UK FTT Electrical Installation Tester Bundle 1000V Earth Resistance Measurement With USB, UKAS
- RS-stocknr.:
- 886-878
- Fabrikantnummer:
- 1664 UK FTT
- Fabrikant:
- Fluke
Subtotaal (1 eenheid)*
€ 2.899,00
(excl. BTW)
€ 3.507,79
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 26 oktober 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 2.899,00 |
*prijsindicatie
- RS-stocknr.:
- 886-878
- Fabrikantnummer:
- 1664 UK FTT
- Fabrikant:
- Fluke
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Fluke | |
| Product Type | Electrical Installation Tester Bundle | |
| Loop Impedance Test Type | Phase to Neutral, Phase to Earth | |
| Automatic RCD Test | Yes | |
| RCD Ramp Test | Yes | |
| Model Number | 1664 UK FTT | |
| Non-Tripping | Yes | |
| Insulation Test Voltage | 1000V | |
| Maximum Voltage Measurement | 500V | |
| Test Type | Multifunction Installation Tester | |
| Earth Resistance Measurement | Yes | |
| Downloadable Data | Yes | |
| Interface Type | USB | |
| Continuity Test Current | 1mA | |
| RCD Test Type | AC, Type G, Type S | |
| Height | 125mm | |
| Weight | 1.3kg | |
| Width | 250mm | |
| Standards/Approvals | UL61010, ANSI/ISA, CAN/CSA c22.2 No. 1010 2nd edition, EN610101 Ed 2.0 | |
| Length | 100mm | |
| IP Rating | IP40 | |
| Test Standards | EN61557-10 Second Edition, EN61557-1 to EN61557-7 Second Edition | |
| Power Source | Battery | |
| Safety Category Voltage | 500, 300V | |
| Safety Category Level | CAT III, CAT IV | |
| Battery Type | AA | |
| Minimum Continuity Resistance | 20Ω | |
| Calibrated | UKAS | |
| Maximum Continuity Resistance | 2000Ω | |
| Alles selecteren | ||
|---|---|---|
Merk Fluke | ||
Product Type Electrical Installation Tester Bundle | ||
Loop Impedance Test Type Phase to Neutral, Phase to Earth | ||
Automatic RCD Test Yes | ||
RCD Ramp Test Yes | ||
Model Number 1664 UK FTT | ||
Non-Tripping Yes | ||
Insulation Test Voltage 1000V | ||
Maximum Voltage Measurement 500V | ||
Test Type Multifunction Installation Tester | ||
Earth Resistance Measurement Yes | ||
Downloadable Data Yes | ||
Interface Type USB | ||
Continuity Test Current 1mA | ||
RCD Test Type AC, Type G, Type S | ||
Height 125mm | ||
Weight 1.3kg | ||
Width 250mm | ||
Standards/Approvals UL61010, ANSI/ISA, CAN/CSA c22.2 No. 1010 2nd edition, EN610101 Ed 2.0 | ||
Length 100mm | ||
IP Rating IP40 | ||
Test Standards EN61557-10 Second Edition, EN61557-1 to EN61557-7 Second Edition | ||
Power Source Battery | ||
Safety Category Voltage 500, 300V | ||
Safety Category Level CAT III, CAT IV | ||
Battery Type AA | ||
Minimum Continuity Resistance 20Ω | ||
Calibrated UKAS | ||
Maximum Continuity Resistance 2000Ω | ||
- Land van herkomst:
- GB
Fluke Electrical Installation Tester Bundle, 1000V Insulation Test Voltage, 500V Maximum Voltage Measurement - 1664 UK FTT
This electrical installation tester bundle is a handheld multifunction installation tester designed for comprehensive verification of fixed electrical installations and EV charging protective devices. It runs automated test sequences, protects connected appliances during insulation checks, and transmits measurement results wirelessly to smartphones while storing data for later analysis.
Features & Benefits
• Auto Test runs seven sequential installation tests to save time
• Insulation pre-test prevents damage by detecting connected appliances
• RCD ramp test electrical tester performs VAR mode for smooth DC
• Earth resistance measurement tester offers 25V output at 128Hz
• non-tripping continuity tester 1mA uses low-current measurement for windings
• loop impedance phase to earth tester measures L-PE and L-N in parallel
• Insulation pre-test prevents damage by detecting connected appliances
• RCD ramp test electrical tester performs VAR mode for smooth DC
• Earth resistance measurement tester offers 25V output at 128Hz
• non-tripping continuity tester 1mA uses low-current measurement for windings
• loop impedance phase to earth tester measures L-PE and L-N in parallel
**Applications**
• Suitable for commissioning and verification of installations to local regulations
• Ideal for testing EV charging stations with RDC-DD and RCD type A-EV monitors
• Used for maintenance checks where shared, cloud-stored results are required
• Can be used for ring final circuit testing without changing connections
• Used with high-current loop mode for Rapid impedance surveys
• Ideal for testing EV charging stations with RDC-DD and RCD type A-EV monitors
• Used for maintenance checks where shared, cloud-stored results are required
• Can be used for ring final circuit testing without changing connections
• Used with high-current loop mode for Rapid impedance surveys
How are results transferred and archived in the field?
Measurement data can be sent to a mobile device and saved to Cloud storage via the manufacturer’s wireless system and associated software for report generation.
Which RCD types and test currents are supported for tripping and ramp tests?
The unit exercises AC, A and B-compatible VAR modes, including 6mA/60mA/200mA profiles for EV/DC monitor testing and stepped/linear rising tests across specified percentage ranges of rated current.
What continuity and insulation test ranges does it provide?
Continuity is autoranging to 2000Ω with resolution down to 0.01Ω and insulation tests selectable up to 1000V with multiple resistance ranges suited to various test voltages.
How does the instrument handle loop and fault current assessment?
It measures loop and line impedance with hi-current and standard modes, computes prospective earth fault current or prospective short-circuit current from measured voltage and impedance, and stores Peak loop values.