Gossen Metrawatt PROFiTEST MF XTRA Multifunction Tester 600V Earth Resistance Measurement With USB

RS-stocknr.:: 266-2727
Artikelnummer Distrelec:: 303-73-661
Fabrikantnummer:: M535H
Fabrikant:: Gossen Metrawatt

Gossen Metrawatt PROFiTEST MF XTRA Multifunction Tester 600V Earth Resistance Measurement With USB

Subtotaal (1 eenheid)*

€ 3.392,59

(excl. BTW)

€ 4.105,03

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Voorradig bij de fabrikant

Klaar voor verzending vanaf 21 december 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 3.392,59

*prijsindicatie

RS-stocknr.:: 266-2727
Artikelnummer Distrelec:: 303-73-661
Fabrikantnummer:: M535H
Fabrikant:: Gossen Metrawatt

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Gossen Metrawatt
	Loop Impedance Test Type	4 Wire
	Product Type	Multifunction Tester
	Automatic RCD Test	No
	Model Number	PROFiTEST MF XTRA
	RCD Ramp Test	No
	Non-Tripping	Yes
	Insulation Test Voltage	600V
	Maximum Voltage Measurement	230V
	Earth Resistance Measurement	Yes
	Downloadable Data	No
	Interface Type	USB
	Continuity Test Current	1.6mA
	RCD Test Type	Type A
	Width	260mm
	Standards/Approvals	DAkkS Calibration Certificate, EN 501101, IEC 603646, RoHS
	Weight	2.7kg
	Height	90mm
	Remote Switch Mode	No
	Length	330mm
	Test Standards	EN 61010, DIN VDE 0100-600
	IP Rating	IP40
	Display Type	LCD
	Power Source	Battery
	Safety Category Voltage	300V
	Safety Category Level	CAT III, CAT IV
	Battery Type	Rechargeable
	Minimum Operating Temperature	0°C
	Maximum Operating Temperature	40°C

	Alles selecteren
	Merk Gossen Metrawatt
	Loop Impedance Test Type 4 Wire
	Product Type Multifunction Tester
	Automatic RCD Test No
	Model Number PROFiTEST MF XTRA
	RCD Ramp Test No
	Non-Tripping Yes
	Insulation Test Voltage 600V
	Maximum Voltage Measurement 230V
	Earth Resistance Measurement Yes
	Downloadable Data No
	Interface Type USB
	Continuity Test Current 1.6mA
	RCD Test Type Type A
	Width 260mm
	Standards/Approvals DAkkS Calibration Certificate, EN 501101, IEC 603646, RoHS
	Weight 2.7kg
	Height 90mm
	Remote Switch Mode No
	Length 330mm
	Test Standards EN 61010, DIN VDE 0100-600
	IP Rating IP40
	Display Type LCD
	Power Source Battery
	Safety Category Voltage 300V
	Safety Category Level CAT III, CAT IV
	Battery Type Rechargeable
	Minimum Operating Temperature 0°C
	Maximum Operating Temperature 40°C

M535H PROFiTEST MF Series - Datasheet

Vrijgesteld

Land van herkomst:: DE

Gossen-Metrawatt Multifunction Tester, 600V Insulation Test Voltage, 230V Maximum Voltage Measurement - M535H

This multifunction tester offers comprehensive verification of electrical installations across a range of site conditions. Designed for portable fault-finding and compliance testing, it operates from a rechargeable battery and displays results on an LCD. The instrument supports earth resistance measurement, continuity checks and loop impedance evaluations while meeting recognised test standards for professional use.

Features and Benefits:

• *Made in Germany - including DAkkS calibration certificate
• 600V insulation test voltage gives high-voltage diagnostic capability
• 1.6mA continuity test current ensures accurate low-current continuity detection
• Loop impedance 4-wire tester for precise impedance readings
• Non-tripping RCD Type A tester for live RCD assessment without nuisance trips
• USB Interface electrical test instrument enables easy data transfer

Applications

• Suitable for on-site verification of earthing arrangements
• Ideal for distribution board loop impedance surveys
• Used with Type A RCDs for non-disruptive testing
• Can be used for insulation testing during maintenance
• Suitable for portable measurements in workshops and on site

What safety categories does the instrument support?

It is rated for use within CAT III and CAT IV environments and at 300V safety-category voltage.

How is the unit powered and what are the environmental limits?

It uses a rechargeable battery and is specified to operate between 0°C and 40°C.

Does the tester provide formal calibration documentation?

It is supplied with a DAkkS calibration certificate status and conforms to the specified approval standards.

What ingress protection and portability features are provided?

The enclosure has an IP40 rating and the instrument weighs 2.7 kg for site portability.

Which standards does the tester comply with for laboratory and field testing?

It adheres to EN 61010 and DIN VDE 0100-600 as part of its test standards.