Gossen Metrawatt PROFiTEST MF TECH Multifunction Tester 600V Earth Resistance Measurement With USB

RS-stocknr.:: 266-2728
Artikelnummer Distrelec:: 303-73-732
Fabrikantnummer:: M535K
Fabrikant:: Gossen Metrawatt

Gossen Metrawatt PROFiTEST MF TECH Multifunction Tester 600V Earth Resistance Measurement With USB

Subtotaal (1 eenheid)*

€ 2.499,00

(excl. BTW)

€ 3.023,79

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

7 stuk(s) klaar voor verzending

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 2.499,00

*prijsindicatie

RS-stocknr.:: 266-2728
Artikelnummer Distrelec:: 303-73-732
Fabrikantnummer:: M535K
Fabrikant:: Gossen Metrawatt

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Gossen Metrawatt
	Loop Impedance Test Type	3 Wire, 2 Wire, Phase to Neutral, Phase to Earth
	Product Type	Multifunction Tester
	Automatic RCD Test	No
	Model Number	PROFiTEST MF TECH
	RCD Ramp Test	No
	Non-Tripping	Yes
	Insulation Test Voltage	600V
	Maximum Voltage Measurement	230V
	Earth Resistance Measurement	Yes
	Downloadable Data	No
	Interface Type	USB
	Continuity Test Current	1.6mA
	RCD Test Type	Type A
	Length	330mm
	Weight	2.7kg
	Standards/Approvals	DAkkS Calibration Certificate, EN 501101, IEC 603646, RoHS
	Width	260mm
	Height	90mm
	Remote Switch Mode	No
	Test Standards	DIN VDE 0100-600, EN 61010
	IP Rating	IP40
	Power Source	Battery
	Safety Category Voltage	300V
	Safety Category Level	CAT III, CAT IV
	Battery Type	Rechargeable
	Display Type	LCD
	Minimum Operating Temperature	0°C
	Maximum Operating Temperature	40°C

	Alles selecteren
	Merk Gossen Metrawatt
	Loop Impedance Test Type 3 Wire, 2 Wire, Phase to Neutral, Phase to Earth
	Product Type Multifunction Tester
	Automatic RCD Test No
	Model Number PROFiTEST MF TECH
	RCD Ramp Test No
	Non-Tripping Yes
	Insulation Test Voltage 600V
	Maximum Voltage Measurement 230V
	Earth Resistance Measurement Yes
	Downloadable Data No
	Interface Type USB
	Continuity Test Current 1.6mA
	RCD Test Type Type A
	Length 330mm
	Weight 2.7kg
	Standards/Approvals DAkkS Calibration Certificate, EN 501101, IEC 603646, RoHS
	Width 260mm
	Height 90mm
	Remote Switch Mode No
	Test Standards DIN VDE 0100-600, EN 61010
	IP Rating IP40
	Power Source Battery
	Safety Category Voltage 300V
	Safety Category Level CAT III, CAT IV
	Battery Type Rechargeable
	Display Type LCD
	Minimum Operating Temperature 0°C
	Maximum Operating Temperature 40°C

Datasheet - Profitest MF Series

Vrijgesteld

Land van herkomst:: DE

Gossen-Metrawatt Multifunction Tester, 230V Maximum Voltage Measurement, 600V Insulation Test Voltage - M535K

This multifunction tester is a portable electrical tester intended for inspection and verification of low-voltage installations. It operates from battery power and provides measurement capabilities for voltage, insulation, loop impedance and earth resistance within typical on-site conditions. The instrument includes an LCD for readout and a USB Interface for data connectivity, with an ingress protection rating suitable for indoor use.

Features and Benefits:

• *Made in Germany - including DAkkS calibration certificate
• 1.6 mA continuity test current provides sensitive loop and conductor checks
• 600 V insulation test voltage enables robust dielectric verification
• 230 V maximum voltage measurement supports standard supply testing
• CAT III/CAT IV safety category allows measurements in protected installations
• Rechargeable battery offers untethered on-site operation

Applications

• Suitable for verifying RCD Type A performance in installations
• Ideal for measuring earth resistance during periodic inspections
• Used with distribution boards for loop impedance assessment
• Can be used for insulation testing on newly installed circuits
• Useful for continuity checks in maintenance and fault-finding

What RCD test capability does it offer?

It performs Type A RCD tests and supports non-tripping test procedures for live-circuit diagnostics.

Which standards and approvals govern its measurements?

The instrument is compliant with DIN VDE 0100-600 and EN 61010 and carries DAkkS calibration and EN 50110-1, IEC 60364-6 and RoHS listings.

What environmental operating range applies to field use?

It is designed to operate between 0 °C and 40 °C and has an IP40 rating indicating protection against solid objects but not water ingress.

How does it handle loop impedance measurement modes?

It can perform 2‑wire and 3‑wire loop impedance tests Plus phase-to-neutral and phase-to-earth measurements.

What Interface and data options are available?

The unit provides a USB Interface for connection but does not support downloadable data storage.