Hirschmann Test & Measurement 932959001 Test Equipment Set, CAT III

RS-stocknr.:: 775-681
Artikelnummer Distrelec:: 304-11-461
Fabrikantnummer:: 932959001
Fabrikant:: Hirschmann Test & Measurement

Hirschmann Test & Measurement 932959001 Test Equipment Set, CAT III

Bulkkorting beschikbaar

Subtotaal (1 eenheid)*

€ 39,27

(excl. BTW)

€ 47,52

(incl. BTW)

Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw

Aantal stuks	Per stuk
1 - 10	€ 39,27
11 - 25	€ 38,83
26 +	€ 38,02

*prijsindicatie

RS-stocknr.:: 775-681
Artikelnummer Distrelec:: 304-11-461
Fabrikantnummer:: 932959001
Fabrikant:: Hirschmann Test & Measurement

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Hirschmann Test & Measurement
	Lead Type	Test Equipment Set
	Product Type	Multimeter Leads
	Connector Type	Spring Loaded Plug, Miniature Crocodile Clip, Spring Loaded Socket
	Lead Length	1m
	Safety Category Voltage	600V
	Minimum Operating Temperature	-15°C
	Maximum Operating Temperature	70°C
	Safety Category Level	CAT III
	Standards/Approvals	No

	Alles selecteren
	Merk Hirschmann Test & Measurement
	Lead Type Test Equipment Set
	Product Type Multimeter Leads
	Connector Type Spring Loaded Plug, Miniature Crocodile Clip, Spring Loaded Socket
	Lead Length 1m
	Safety Category Voltage 600V
	Minimum Operating Temperature -15°C
	Maximum Operating Temperature 70°C
	Safety Category Level CAT III
	Standards/Approvals No

Datasheet

Vrijgesteld

Land van herkomst:: DE

Hirschmann Test & Measurement PMS 0.64 Micro Set

Brought to you by Hirschmann Test & Measurement. A high-quality micro test lead set useable for testing very small components. With a maximum working voltage of 60 V dc, these test leads are an excellent addition for electronic testing applications. All models are highly reliable and excellent quality.

Features and Benefits

• Sprung test probes red and black

• Micro clips red and black

• Miniature crocodile clip

• Easy to use

What are test leads?

These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.

What are test probes?

Connecting to multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Hirschmann Test & Measurement, each probe provides much-needed precision.

What are the differences between safety categories?

For protection, safety categories are an important attribute which must be taken into consideration for any electronic test equipment. With any category (i.e CAT II, CAT III), a higher voltage will indicate a higher level of protection. As an example, a test probe providing CAT III 1000 V, provides a higher degree of protection than a CAT III 600 V probe.