Fluke 175 Handheld Digital Multimeter True RMS - RSCAL Calibrated

RS-stocknr.:: 250-725
Fabrikantnummer:: FLUKE 175
Fabrikant:: Fluke

Fluke 175 Handheld Digital Multimeter True RMS - RSCAL Calibrated

Subtotaal (1 eenheid)*

€ 405,10

(excl. BTW)

€ 490,17

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Beperkte voorraad

116 resterend, klaar voor verzending
Plus verzending 100 stuk(s) vanaf 23 april 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 405,10

*prijsindicatie

RS-stocknr.:: 250-725
Fabrikantnummer:: FLUKE 175
Fabrikant:: Fluke

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Fluke
	Product Type	Multimeter
	Multimeter Type	Handheld
	Model Number	175
	Display Type	Digital
	Resistance Resolution	100mΩ
	Functions Measured	AC Current, AC Voltage, Capacitance, Continuity, DC Current, DC Voltage, Diode Test, Frequency, Resistance
	Maximum DC Voltage Measurement	1kV dc
	Maximum Resistance Measurement	50mΩ
	True RMS	Yes
	DC Current Accuracy	±1 % rdg + 3 Digits
	AC Voltage Accuracy	±1 % rdg + 3 Digits
	DC Voltage Accuracy	±0.15 % rdg + 2 Digits
	AC Current Accuracy	±1.5 % rdg + 3 Digits
	DC Current Resolution	0.01mA dc
	AC Voltage Resolution	0.1mV ac
	AC Current Resolution	0.01mA ac
	DC Voltage Resolution	0.1 mV dc
	Maximum Frequency	1kHz
	Resistance Measurement Accuracy	±1.5 % rdg + 3 Digits
	Minimum Operating Temperature	-10°C
	Battery Life	200h
	Maximum Operating Temperature	50°C
	Width	90mm
	Length	185mm
	Height	43mm
	Standards/Approvals	No
	Weight	420g
	Safety Category Level	CAT III, CAT IV
	Calibrated	RSCAL
	Safety Category Voltage	1000V

	Alles selecteren
	Merk Fluke
	Product Type Multimeter
	Multimeter Type Handheld
	Model Number 175
	Display Type Digital
	Resistance Resolution 100mΩ
	Functions Measured AC Current, AC Voltage, Capacitance, Continuity, DC Current, DC Voltage, Diode Test, Frequency, Resistance
	Maximum DC Voltage Measurement 1kV dc
	Maximum Resistance Measurement 50mΩ
	True RMS Yes
	DC Current Accuracy ±1 % rdg + 3 Digits
	AC Voltage Accuracy ±1 % rdg + 3 Digits
	DC Voltage Accuracy ±0.15 % rdg + 2 Digits
	AC Current Accuracy ±1.5 % rdg + 3 Digits
	DC Current Resolution 0.01mA dc
	AC Voltage Resolution 0.1mV ac
	AC Current Resolution 0.01mA ac
	DC Voltage Resolution 0.1 mV dc
	Maximum Frequency 1kHz
	Resistance Measurement Accuracy ±1.5 % rdg + 3 Digits
	Minimum Operating Temperature -10°C
	Battery Life 200h
	Maximum Operating Temperature 50°C
	Width 90mm
	Length 185mm
	Height 43mm
	Standards/Approvals No
	Weight 420g
	Safety Category Level CAT III, CAT IV
	Calibrated RSCAL
	Safety Category Voltage 1000V

Vrijgesteld

Land van herkomst:: CZ

Fluke Multimeter, True RMS Capability, 200h Battery Life - FLUKE 175

This multimeter is a handheld digital instrument designed for field service and bench repair in electrical, electronics, automation and mechanical settings. It provides True-RMS measurements for accurate readings on non‑sinusoidal signals and offers a broad range of functions including voltage, current, resistance, capacitance, frequency, diode, continuity and temperature sensing to diagnose electro‑mechanical and HVAC systems.

Features & Benefits

• True‑RMS measurement for accurate readings on complex waveforms
• DC voltage accuracy of ±0.15% rdg +2 for precision measurements
• AC current accuracy of ±1.5% rdg +3 for reliable load assessment
• Capacitance and frequency ranges supporting 10000μF and 100kHz troubleshooting
• Resistance measurement down to 50mΩ for low‑resistance checks
• Alkaline battery operation delivering 200 h typical runtime

Applications

• Suitable for commissioning and fault‑finding on motor drives and inverters
• Ideal for servicing HVAC controls and temperature‑sensing circuits
• Used for verification of PCB power rails and signal integrity
• Can be used for routine electrical installation spot checks and maintenance
• Used with electronic test benches for component and module validation

What input functions are available for troubleshooting mixed‑signal systems?

You can measure DC and AC voltage, DC and AC current, resistance, capacitance, frequency, continuity, diode conditions and temperature using the included bead thermocouple probe.

How does the instrument indicate rapidly changing signals and trends?

The display includes an analogue‑style bargraph that updates frequently to show transient behaviour alongside the digital readout.

What is included to GET started immediately on site?

Supplied items include test leads with 4mm lantern tips and protective cap, a preinstalled 9V battery and a user manual

certain variants include a temperature probe.

How portable is it for frequent field use?

The instrument weighs 420 g and features an ergonomic case with an integrated holster for comfortable handling and transport.

Are there features to conserve battery during idle periods?

A selectable sleep mode is provided to extend alkaline battery life during inactivity.

Supplied with

Fluke 175 True-RMS Digital Multimeter
(1 pair) Test Leads
9V Battery (Installed)
Quick reference guide