RS PRO IDM103N Handheld Digital Multimeter, 10A ac Max, 10A dc Max, 1000V ac Max

Bekijk alle Multimeters

Subtotaal (1 eenheid)*

€ 196,47

(excl. BTW)

€ 237,73

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • 2 stuk(s) klaar voor verzending
  • 28 stuk(s) klaar voor verzending vanaf een andere locatie
  • Plus verzending 100 stuk(s) vanaf 16 juni 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 +€ 196,47

*prijsindicatie

RS-stocknr.:
123-3235
Artikelnummer Distrelec:
304-05-201
Fabrikant:
RS PRO
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

RS PRO

Multimeter Type

Handheld

Display Type

Digital

Model Number p

IDM103N

Functions Measured

AC Current, AC Voltage, DC Current, DC Voltage, Frequency, Resistance

Absolute Maximum DC Current Measurement

10A dc

Absolute Maximum DC Voltage Measurement

1000V dc

Absolute Maximum AC Voltage Measurement

1000V ac

Absolute Maximum AC Current Measurement

10A ac

Absolute Maximum Resistance Measurement

40MΩ

Absolute Maximum Capacitance Measurement

40mF

True RMS

No

Maximum Frequency

40MHz

DC Current Measurement Resolution

10µA dc

AC Current Measurement Resolution

10µA ac

Resistance Measurement Resolution

100mΩ

AC Voltage Measurement Resolution

0.1mV ac

DC Voltage Measurement Resolution

100µV dc

Safety Category Level

CAT II, CAT III

Capacitance Measurement Resolution

1pF

Weight

620g

Height

212mm

Best Resistance Measurement Accuracy

±0.6% + 3 Digits

Maximum Operating Temperature

+50°C

Safety Category Voltage

600 V, 1000V

Best DC Current Accuracy

±0.6% + 2 Digits

Minimum Operating Temperature

0°C

Battery Type

AAA 1.5 V, AM4, IEC LR03

Best Capacitance Measurement Accuracy

±2% + 8 Digits

Best AC Voltage Accuracy

±1.3% + 5 Digits

Best DC Voltage Accuracy

±0.25% + 2 Digits

Length

100mm

Width

55mm

Dimensions

100 x 55 x 212 (with Holster)mm

Best AC Current Accuracy

±1.5% + 5 Digits

Land van herkomst:
TW

RS PRO IDM103N Digital Multimeter


RS PRO IDM103N digital multimeters are handheld devices which can measure capacitance, voltage, electrical current and resistance with diode and continuity check. This meter has an LCD display where the measurement readouts can be viewed.

This digital multimeter offers high specification performance with 4000 Count display and 42 segment bar graph.

RS PRO range of handheld and bench digital multimeters are RS approved meaning that they are great value for money and high quality you can rely on.

Features and Benefits


10 A (continuous) current range
Data hold/relative modes
1 MHz counter with full 9999 Count display
Diode test and continuity sounder
4 nF to 40 μF capacitance ranges
Mains proof resistance ranges
Full autoranging with manual override
Auto power shutdown
Digital display update rate 2 per second
Bargraph display update rate 20 per second
Fused 400 mA and 10A ranges
Dust and water protected to IP64
Water resistant via O-Ring sealed case
Dual high energy fuse protection

What does it measure?


DC and AC voltages - up to 1000 V
DC and AC current - up 10A with 10 mA resolution
Resistance and continuity checking - up to 40 MΩ
Capacitance - up to 40 mF
Frequency - up to 400 MHz

Extra Protection


The multimeter is supplied with a protective holster that includes a built-in stand, a nail hook and convenient test lead storage. This holster provides an extra degree of protection and convenience.

Display


The LED-backlit display turns ON/OFF at the touch of a button and automatically turns off to save battery life.

RS-232 Optical Interface


The IDM103N has an RS-232 optical interface to connect to a PC for data acquisition. Allowing measurements to be transferred to a PC for further analysis.

Batteries


Batteries can be easily replaced by unscrewing two screws to remove the battery door for battery replacement. Designed for users convenience without opening the bottom case.

What does it include?


Pair of Test Leads
Test Clips
User Manual
Protective Holster

Typical Applications:
A digital multimeter is a handy test tool that measures electrical values such as voltage, current, and resistance. A DMM is used by technicians in the following areas:
Electrical and electronic industries

Safety guidelines
When using any electrical test equipment it is advised that you refer to the user’s manual for proper working operating procedures and safety precautions in order to avoid potential safety hazards.

What is the difference between an analogue and a digital multimeter?
The main difference is the display. A digital multimeter will show the results as numbers on a screen (usually a LED or LCD screen) whereas the analogue version has a needle to show the value.

Warning

When using test leads or probes, keep your fingers behind the finger guards. Remove test lead from the meter before opening the battery door or meter case.

Gerelateerde Links