Amprobe Digital Digital Multimeter

RS-stocknr.:: 794-3092
Fabrikantnummer:: AM-520-EUR
Fabrikant:: Amprobe

Afbeelding representeert productcategorie

Subtotaal (1 eenheid)*

€ 121,00

(excl. BTW)

€ 146,41

(incl. BTW)

Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw

Aantal stuks	Per stuk
1 +	€ 121,00

*prijsindicatie

Kalibratie-opties

Amprobe Digital Digital Multimeter, RSCAL Calibrated

Calibration Type:: RSCAL

RS-stocknr.: 794-5014

Per stuk

€ 213,00

(excl. BTW)

€ 257,73

(incl. BTW)

RS-stocknr.:: 794-3092
Fabrikantnummer:: AM-520-EUR
Fabrikant:: Amprobe

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Amprobe
	Product Type	Multimeter
	Multimeter Type	Digital
	Display Type	Digital
	Functions Measured	AC Current, AC Voltage, Capacitance, DC Current, DC Voltage, Resistance, Temperature
	True RMS	No
	DC Voltage Accuracy	±0.8 % rdg + 1 Digits
	AC Voltage Accuracy	±1 % rdg + 3 Digits
	AC Current Accuracy	± 1.2 % rdg + 3 Digits
	DC Current Accuracy	±1 % rdg + 2 Digits
	Maximum Frequency	400Hz
	Resistance Measurement Accuracy	±1.2 % rdg + 2 Digits
	Height	45mm
	Length	182mm
	Standards/Approvals	No
	Weight	354g
	Width	90mm
	Safety Category Level	CAT II, CAT III
	Safety Category Voltage	1000V

	Alles selecteren
	Merk Amprobe
	Product Type Multimeter
	Multimeter Type Digital
	Display Type Digital
	Functions Measured AC Current, AC Voltage, Capacitance, DC Current, DC Voltage, Resistance, Temperature
	True RMS No
	DC Voltage Accuracy ±0.8 % rdg + 1 Digits
	AC Voltage Accuracy ±1 % rdg + 3 Digits
	AC Current Accuracy ± 1.2 % rdg + 3 Digits
	DC Current Accuracy ±1 % rdg + 2 Digits
	Maximum Frequency 400Hz
	Resistance Measurement Accuracy ±1.2 % rdg + 2 Digits
	Height 45mm
	Length 182mm
	Standards/Approvals No
	Weight 354g
	Width 90mm
	Safety Category Level CAT II, CAT III
	Safety Category Voltage 1000V

Vrijgesteld

Land van herkomst:: CN

Fluke Multimeter, 400Hz Maximum Frequency, 354g Weight - AM-520-EUR

This multimeter is a handheld instrument designed for HVAC and electrical professionals to measure a wide range of electrical and temperature parameters in field environments. It provides voltage, current, resistance, capacitance and temperature measurement capability together with non-contact voltage detection and practical on-tool conveniences for troubleshooting and maintenance tasks.

Features & Benefits

• AC current accuracy ±1.2% rdg+3 digits supports precise HVAC current checks
• DC voltage ±0.8% rdg+1 digit for accurate DC system diagnostics
• Frequency measurement to 10MHz aids motor and signal verification
• Capacitance and temperature ranges verify motor start capacitors
• VolTect™ non-contact voltage detection improves safety during inspection
• Built-in torch and probe holder enable hands-free, low-light work

Applications

• Suitable for flame-sensor micro-amp measurements during burner servicing
• Ideal for checking motor start-up capacitors and run components
• Used for verifying AC and DC supplies on automation panels
• Can be used for temperature checks on vents, transformers and fuses
• Used with field wiring to confirm continuity and diode behaviour

What measurement ranges are available for current and voltage?

It measures up to 10A for AC/DC current and up to 600V for both AC and DC ranges with autoranging and manual-ranging options.

How does the instrument display changing signals?

The backlit LCD includes an analogue bar graph to help monitor fast-changing values alongside numeric readings.

Which temperature probe type is supplied and what is the temperature span?

A K-type thermocouple probe is provided and the input covers −40°C to 1000°C.

What capacitance and frequency capabilities support motor diagnostics?

Capacitance ranges span from tens of nF to thousands of μF and frequency measurement extends from 10Hz to 10MHz for comprehensive component checks.

How is continuity and diode testing indicated?

Audible continuity is included and a diode-test function provides forward-voltage verification for rectifiers and semiconductor checks.

Standards

CAT III 600V, CAT II 1000V

Supplied with

• 1 x 9V(6F22) battery installed
• Test leads
• 1 x Type-K probe
• Velcro strap
• Carrying case and users manual