Amprobe Handheld Multimeter, RSCAL Calibrated
- RS-stocknr.:
- 794-5014
- Fabrikantnummer:
- AM-520-EUR
- Fabrikant:
- Amprobe
Subtotaal (1 eenheid)*
€ 209,16
(excl. BTW)
€ 253,08
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 16 oktober 2028
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 209,16 |
*prijsindicatie
- RS-stocknr.:
- 794-5014
- Fabrikantnummer:
- AM-520-EUR
- Fabrikant:
- Amprobe
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Amprobe | |
| Product Type | Multimeter | |
| Multimeter Type | Handheld | |
| Display Type | LCD | |
| Functions Measured | AC Current, AC Voltage, Capacitance, DC Current, DC Voltage, Resistance, Temperature | |
| True RMS | No | |
| AC Current Accuracy | ± 1.2 % rdg + 3 Digits | |
| DC Voltage Accuracy | ±0.8 % rdg + 1 Digits | |
| DC Current Accuracy | ±1 % rdg + 2 Digits | |
| AC Voltage Accuracy | ±1 % rdg + 3 Digits | |
| Maximum Frequency | 400Hz | |
| Resistance Measurement Accuracy | ±1.2 % rdg + 2 Digits | |
| Standards/Approvals | No | |
| Weight | 354g | |
| Length | 182mm | |
| Height | 45mm | |
| Width | 90mm | |
| Safety Category Level | CAT II, CAT III | |
| Calibrated | RSCAL | |
| Safety Category Voltage | 1kV | |
| Alles selecteren | ||
|---|---|---|
Merk Amprobe | ||
Product Type Multimeter | ||
Multimeter Type Handheld | ||
Display Type LCD | ||
Functions Measured AC Current, AC Voltage, Capacitance, DC Current, DC Voltage, Resistance, Temperature | ||
True RMS No | ||
AC Current Accuracy ± 1.2 % rdg + 3 Digits | ||
DC Voltage Accuracy ±0.8 % rdg + 1 Digits | ||
DC Current Accuracy ±1 % rdg + 2 Digits | ||
AC Voltage Accuracy ±1 % rdg + 3 Digits | ||
Maximum Frequency 400Hz | ||
Resistance Measurement Accuracy ±1.2 % rdg + 2 Digits | ||
Standards/Approvals No | ||
Weight 354g | ||
Length 182mm | ||
Height 45mm | ||
Width 90mm | ||
Safety Category Level CAT II, CAT III | ||
Calibrated RSCAL | ||
Safety Category Voltage 1kV | ||
Vrijgesteld
- Land van herkomst:
- CN
Fluke Multimeter, 400Hz Maximum Frequency, 354g Weight - AM-520-EUR
This multimeter is a handheld instrument designed for HVAC and electrical professionals to measure a wide range of electrical and temperature parameters in field environments. It provides voltage, current, resistance, capacitance and temperature measurement capability together with non-contact voltage detection and practical on-tool conveniences for troubleshooting and maintenance tasks.
Features & Benefits
• AC current accuracy ±1.2% rdg+3 digits supports precise HVAC current checks
• DC voltage ±0.8% rdg+1 digit for accurate DC system diagnostics
• Frequency measurement to 10MHz aids motor and signal verification
• Capacitance and temperature ranges verify motor start capacitors
• VolTect™ non-contact voltage detection improves safety during inspection
• Built-in torch and probe holder enable hands-free, low-light work
• DC voltage ±0.8% rdg+1 digit for accurate DC system diagnostics
• Frequency measurement to 10MHz aids motor and signal verification
• Capacitance and temperature ranges verify motor start capacitors
• VolTect™ non-contact voltage detection improves safety during inspection
• Built-in torch and probe holder enable hands-free, low-light work
**Applications**
• Suitable for flame-sensor micro-amp measurements during burner servicing
• Ideal for checking motor start-up capacitors and run components
• Used for verifying AC and DC supplies on automation panels
• Can be used for temperature checks on vents, transformers and fuses
• Used with field wiring to confirm continuity and diode behaviour
• Ideal for checking motor start-up capacitors and run components
• Used for verifying AC and DC supplies on automation panels
• Can be used for temperature checks on vents, transformers and fuses
• Used with field wiring to confirm continuity and diode behaviour
What measurement ranges are available for current and voltage?
It measures up to 10A for AC/DC current and up to 600V for both AC and DC ranges with autoranging and manual-ranging options.
How does the instrument display changing signals?
The backlit LCD includes an analogue bar graph to help monitor fast-changing values alongside numeric readings.
Which temperature probe type is supplied and what is the temperature span?
A K-type thermocouple probe is provided and the input covers −40°C to 1000°C.
What capacitance and frequency capabilities support motor diagnostics?
Capacitance ranges span from tens of nF to thousands of μF and frequency measurement extends from 10Hz to 10MHz for comprehensive component checks.
How is continuity and diode testing indicated?
Audible continuity is included and a diode-test function provides forward-voltage verification for rectifiers and semiconductor checks.
Standards
CAT III 600V, CAT II 1000V
Supplied with
• 1 x 9V(6F22) battery installed
• Test leads
• 1 x Type-K probe
• Velcro strap
• Carrying case and users manual
• Test leads
• 1 x Type-K probe
• Velcro strap
• Carrying case and users manual
Gerelateerde Links
- Amprobe Handheld Multimeter, UKAS Calibrated
- Amprobe Handheld Multimeter RSCAL Calibrated
- Amprobe Handheld Multimeter
- Amprobe Handheld Multimeter UKAS Calibrated
- Amprobe DM73C Handheld Multimeter, RSCAL Calibrated
- Amprobe 34XRA Handheld Multimeter True RMS, RSCAL Calibrated
- Amprobe 38XRA Handheld Multimeter True RMS, RSCAL Calibrated
- Amprobe DM78C DM78C Handheld Multimeter RSCAL Calibrated