Fluke LinkIQ DUO Cable+Network Network Tester USB, RJ45, LC Fibre

Bekijk alle Network Testers

Subtotaal (1 eenheid)*

€ 4.919,00

(excl. BTW)

€ 5.951,99

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • Plus verzending 4 stuk(s) vanaf 23 maart 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 +€ 4.919,00

*prijsindicatie

RS-stocknr.:
434-370
Fabrikantnummer:
LIQ-KIT-FMC
Fabrikant:
Fluke
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Fluke

Product Type

Network Cable Tester

Equipment Type

Network Tester

Connector Type

USB, RJ45, LC Fibre

Model Number

LinkIQ DUO Cable+Network

Tone

Yes

Power Source

Battery

Battery Type

Lithium-ion

Battery Life

8h

Display Type

Capacitive Touch Display

Minimum Operating Temperature

0°C

Maximum Operating Temperature

45°C

Weight

624g

Length

220mm

Height

50mm

Standards/Approvals

1000BASELX, 10GBASESR, 1000BASESX, 10GBASELR

Land van herkomst:
US

Fluke Network Cable Tester, 8h Battery Life, 4.17kg Weight - LIQ-KIT-FMC


This network cable tester is a portable Fibre media converter kit designed to extend LinkIQ tester capabilities to 1Gb/s and 10Gb/s Fibre Ethernet ports. It enables technicians to verify connectivity, identify switch information and send IPv4/IPv6 pings via SFP‑equipped media converters, supporting both single‑mode and multimode links. The kit includes power for field operation and a carrying case for organised transport.

Features & Benefits


• Supports 1000BASE‑SX and 1000BASE‑LX for versatile 1Gb/s testing
• Handles 10GBASE‑SR and 10GBASE‑LR for 10Gb/s Fibre diagnostics
• Battery pack with 5000mAh lithium‑polymer for portable use
• USB‑C and USB‑A power outputs for converter operation and charging
• Includes LC Fibre cords and RJ45 cable for immediate connection
• Digital LED indicates remaining battery level for planning

Applications


• Suitable for commissioning single‑mode Fibre links in data centres
• Ideal for troubleshooting multimode Fibre installations on site
• Used with LinkIQ testers to validate switch port, VLAN and IP reachability
• Can be used for field verification of 10G Fibre ports before handover
• Used for portable network diagnostics where mains power is unavailable

What Fibre connectors and speeds are supported by the kit?


The kit uses LC‑terminated patch cords and SFP modules to test 1Gb/s and 10Gb/s links, covering 1000BASE‑SX/LX and 10GBASE‑SR/LR standards.

How is the media converter powered during field work?


A lithium‑polymer power bank with 5000mAh capacity supplies 5V/2A via USB‑C or USB‑A to run the media converters and can be recharged via USB‑C.

Which diagnostic capabilities are available when connected to a tester?


When linked to a compatible tester you can read far‑end device details, port/VLAN identifiers and perform IPv4 and IPv6 ping tests.

What items are included to make the kit ready for immediate use?


The kit contains media converters, SFPs for single‑mode and multimode, LC patch cords, an RJ45 cable, power cabling and a dedicated carrying case.

Gerelateerde Links