Fluke Networks LinkIQ Cable Tester RJ45

RS-stocknr.:: 219-6531
Artikelnummer Distrelec:: 302-16-592
Fabrikantnummer:: LIQ-100
Fabrikant:: Fluke Networks

Subtotaal (1 eenheid)*

€ 2.411,59

(excl. BTW)

€ 2.918,02

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 75,00

Beperkte voorraad

Plus verzending 5 stuk(s) vanaf 23 februari 2026
Plus verzending 11 stuk(s) vanaf 23 februari 2026
Plus verzending 6 stuk(s) vanaf 25 februari 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 2.411,59

*prijsindicatie

RS-stocknr.:: 219-6531
Artikelnummer Distrelec:: 302-16-592
Fabrikantnummer:: LIQ-100
Fabrikant:: Fluke Networks

Datasheets

Wetgeving en compliance

Productomschrijving

Land van herkomst:: US

LinkIQ Cable and Network Tester Kit

The Fluke Networks LinkIQ Cable + Network tester is the testing solution to verify cable performance up to 10 Gb/s and solve network connectivity problems. LinkIQ validates cable performance using frequency-based measurements and provides distance to fault information along with a wire map of the cable under test.;The LinkIQ™ Cable+Network Tester validates cable performance up to 10GBASE-T via frequency-based measurements.

The LinkIQ™ also provides IPv4 and v6 ping; nearest switch diagnostics (IP address, name, port / VLAN number, and advertised data rates); Power over Ethernet testing (Hardware/Software negotiation and loaded voltage and power tests).

Features and Benefits:

• Cable Performance testing up to 10GBASE-T via frequency-based measurements

• Displays cable length, wire map, and distance to open or short

• Network features including: IPv4 and v6 ping, nearest switch diagnostics (IP address, name, port / VLAN number, and advertised data rates).

• Ethernet Alliance certified PoE Verification – Detects the PoE class (1-8) and power, and performs a load test of available PoE from the connected switch

• Graphical wire map and length test to identify common faults that occur with cabling installation

• Manage results and print reports from LinkWare™ PC

• Language support - the LinkIQ user interface now supports 12 languages

• Rechargeable Li-Ion battery

• Charging via standard USB-C port

• Display 800 x 480 colour capacitive multi touch

• Dimensions 8.5 in x 4.5 in

• Battery: Lithium-ion, 3.6 V, 6400 mAh; Life: 8 hours typical

• Charge time: 4.5 hours

• Charging temperature range: 0 °C to +40 °C

Note

If your unit does not have LinkIQ v1.1 automatically installed, this can be upgraded free of charge by visiting: https://www.flukenetworks.com/support/downloads

Supplied with

LinkIQ Cable+Network Tester with Remote ID 1
Quick Reference Guide
USB-C to USB-A cable
Charging cable,
Cat6A patch cord,
RJ45/11 Modular Adapter
Hanging strap with Remote ID holder
Carrying Case