Onlangs gezocht

    Testec 8000 Series TT-SI 8010A Oscilloscope Probe, Active, Differential Type, 70MHz, 1:100 / 1:1000dB, BNC Connector

    Testec
    RS-stocknr.:
    238-7388
    Fabrikantnummer:
    TT-SI 8010A
    Fabrikant:
    Testec
    Bekijk alle Oscilloscope Probes
    Tijdelijk niet op voorraad nieuwe voorraad verwacht op 13-12-2023, met een levertijd van 1 werkdag.
    Add to Basket
    Aantal stuks

    Toegevoegd

    Prijs Each

    € 1.566,55

    (excl. BTW)

    € 1.895,53

    (incl. BTW)

    Aantal stuksPer stuk
    1 +€ 1.566,55
    RS-stocknr.:
    238-7388
    Fabrikantnummer:
    TT-SI 8010A
    Fabrikant:
    Testec

    Wetgeving en compliance

    Land van herkomst:
    CN

    Productomschrijving

    TT-SI 8010A
    active differential probe


    The Testec active differential probe TT-SI 8010A allows safe and accurate high voltage measurements between two voltage points, none being connected to ground. This probe is designed for a variety of measurements with up to 70MHz / ±7000V and compatible with grounded oscilloscopes (1MOhm input) of all common manufacturers. The probe can be powered with the supplied USB cable and the AC adapter. The probe is supplied in a hardcase with extensive accessories and factory calibration certificate.

    Bandwidth: 70MHz
    Rise time: 5ns
    Attenuation ratio: x100 / x1000
    DC accuracy: ± 2%
    Maximum input voltage:
    Differential mode: ±700V (DC + AC Peak) @ x100
    ±7000V (DC + AC Peak) @ x1000
    Common mode: ±7000V (DC + Peak AC)
    Each side to ground: 1000Vrms CAT III / 2300Vrms
    Safety standard: IEC61010-031: 2015

    Scope of delivery:


    1 x probe series 8000
    1 x hardcase
    2 x test leads with insulated banana plug 4mm (red & black)
    2 x hook clips (red & black)
    2 x pincer hook clip (red & black)
    2 x crocodile clips (red & black)
    1 x insulated BNC test lead 100cm
    1 x USB power cord
    1 x power adapter EU version
    1 x factory calibration certificate
    1 x user manual


    Specificaties

    Kenmerk
    Waarde
    Probe TypeActive, Differential
    Attenuation1:100 / 1:1000dB
    Bandwidth70MHz
    Maximum Common Mode Input Voltage±7000 (DC+AC Peak)V
    Connector TypeBNC
    Model Number pTT-SI 8010A
    Number of Probes1
    Safety Category LevelCAT III
    Safety Category Voltage1000V
    Series8000
    Safety CategoryIEC61010-031:2015
    Rise Time=5ns
    Tijdelijk niet op voorraad nieuwe voorraad verwacht op 13-12-2023, met een levertijd van 1 werkdag.
    Add to Basket
    Aantal stuks

    Toegevoegd

    Prijs Each

    € 1.566,55

    (excl. BTW)

    € 1.895,53

    (incl. BTW)

    Aantal stuksPer stuk
    1 +€ 1.566,55