Fluke MDA-550 III Series, 500 MHz Portable Oscilloscope, 4 Channels

Bekijk alle Oscilloscopes

Subtotaal (1 eenheid)*

€ 9.810,00

(excl. BTW)

€ 11.870,10

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • 1 stuk(s) klaar voor verzending vanaf een andere locatie
  • Plus verzending 1 stuk(s) vanaf 11 juni 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 +€ 9.810,00

*prijsindicatie

Kalibratie-opties

presentation
Fluke MDA-550 III Series, 500 MHz Portable Oscilloscope, 4 Channels, RSCAL
Calibration Type:
RSCAL
RS-stocknr.
280-6619

Per stuk

€ 9.928,50

(excl. BTW)

€ 12.013,48

(incl. BTW)

presentation
Fluke MDA-550 III Series, 500 MHz Portable Oscilloscope, 4 Channels, UKAS
Calibration Type:
UKAS
RS-stocknr.
280-6621

Per stuk

€ 9.970,00

(excl. BTW)

€ 12.063,70

(incl. BTW)

RS-stocknr.:
271-0127
Artikelnummer Distrelec:
303-89-920
Fabrikantnummer:
FLUKE-MDA-550/FPC EU
Fabrikant:
Fluke
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Fluke

Product Type

Oscilloscope

Bandwidth

500MHz

Number of Channels

4

Oscilloscope Type

Portable

Oscilloscope Form

Digital Storage

Interface Type

USB

Memory Depth

400Mpts

Series

MDA-550 III

Standards/Approvals

IEC 61010-2-030, IEC 61010-3

Battery Life

7h

Power Source

Battery

Battery Type

Lithium-ion

Safety Category Level

CAT III, CAT IV

Safety Category Voltage

1000V

Land van herkomst:
RO

Fluke MDA-550 Series Oscilloscope, 500MHz Bandwidth, Portable Type - FLUKE-MDA-550/FPC EU


This portable oscilloscope functions as a mixed-domain motor-drive analyser for fault finding on inverter motor systems. It guides users through connections and test selection, captures voltage, current and harmonics measurements, and generates on-instrument text reports for as-found and as-left documentation in industrial settings.

Features & Benefits


• 500MHz bandwidth delivers high-frequency capture for fast transients
• Four-channel input supports simultaneous multi-point analysis
• Battery operation enables field measurements without mains power
• USB Interface and WiFi support simplify data transfer to PC
• Extended harmonics to 150kHz reveals high-order switching noise
• Shaft-voltage probe set detects impulse discharges to prevent bearing damage

**Applications**


• Suitable for troubleshooting inverter drive input and output faults
• Ideal for assessing DC bus ripple under load conditions
• Used for extended harmonics surveys on industrial power systems
• Can be used for motor shaft voltage diagnostics to prevent bearing failure
• Suitable for commissioning and benchmarking drive performance over time

What insulation-stress measurements can be performed on PWM outputs?


The instrument reports dV/dt, rise/fall times and Peak voltages to assess insulation exposure from Rapid voltage changes.

How are harmonics analysed across different frequency bands?


Harmonic analysis covers DC–51st, 1–9kHz and 9–150kHz ranges, Plus a spectrum mode for voltage modulation up to500MHz.

How is data captured and exported for reporting?


Users can save approximately50 screens to an on-instrument text report, then transfer via mini-USB, USB stick up to32GB or WiFi using supplied PC software.

What safety-rated measurements are supported at the service entrance?


The measuring inputs accept up to1000V to earth and are rated for600V CAT IV/1000V CAT III via compatible high-voltage probes.

Which probe and clamp options allow current and shaft diagnostics?


The tool supports multiple voltage probe ratios and current-clamp scale factors from0.1mV/A to400mV/A, Plus a shaft-voltage set with carbon-fibre brushes for discharge detection.

Gerelateerde Links