PicoScope 4000 Series, 5 MHz PC Based Oscilloscope 2-Channel, UKAS

RS-stocknr.:: 280-6631
Fabrikantnummer:: PicoScope 4262
Fabrikant:: Pico Technology

PicoScope 4000 Series, 5 MHz PC Based Oscilloscope 2-Channel, UKAS

Bekijk alle Oscilloscopes

Subtotaal (1 eenheid)*

€ 1.457,09

(excl. BTW)

€ 1.763,08

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

2 stuk(s) klaar voor verzending

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 1.457,09

*prijsindicatie

RS-stocknr.:: 280-6631
Fabrikantnummer:: PicoScope 4262
Fabrikant:: Pico Technology

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Pico Technology
	Product Type	Oscilloscope
	Bandwidth	5MHz
	Number of Channels	2
	Model Number	PicoScope 4262
	Oscilloscope Type	PC Based
	Interface Type	CAN, IIC, RS232, SPI, UART, USB
	Series	PicoScope 4000
	Width	210mm
	Height	135mm
	Standards/Approvals	No
	Maximum Vertical Sensitivity	4V/div
	Rise Time	70ns
	Maximum Time Base	1000s/div
	Calibrated	UKAS
	Minimum Vertical Sensitivity	2mV/div
	Vertical Resolution	16 bit
	Power Source	Mains
	Minimum Time Base	1ns/div

	Alles selecteren
	Merk Pico Technology
	Product Type Oscilloscope
	Bandwidth 5MHz
	Number of Channels 2
	Model Number PicoScope 4262
	Oscilloscope Type PC Based
	Interface Type CAN, IIC, RS232, SPI, UART, USB
	Series PicoScope 4000
	Width 210mm
	Height 135mm
	Standards/Approvals No
	Maximum Vertical Sensitivity 4V/div
	Rise Time 70ns
	Maximum Time Base 1000s/div
	Calibrated UKAS
	Minimum Vertical Sensitivity 2mV/div
	Vertical Resolution 16 bit
	Power Source Mains
	Minimum Time Base 1ns/div

Land van herkomst:: GB

PicoScope 4000 Series Oscilloscope, 5MHz Bandwidth, 2 Channels - PicoScope 4262

This oscilloscope is a USB‑powered PC‑based instrument designed for precision signal capture in laboratory and field environments. It connects via USB and supports multiple serial interfaces, enabling integration with embedded systems and vehicle networks for waveform analysis across a wide time scale.

Features and Benefits:

• 16‑bit vertical resolution delivers fine amplitude detail for low‑noise signals
• 70ns rise time captures fast edge transitions for diagnostic clarity
• 2mV/div sensitivity resolves small signal variations during testing
• 1000ns/div to 5000s/div time base spans fast and long‑duration events
• CAN I2C SPI UART RS232 compatibility simplifies mixed‑protocol probing

Applications

• Suitable for embedded systems timing and signal integrity checks
• Used for automotive diagnostics involving communication buses
• Ideal for mixed‑signal Interface validation in prototype debugging
• Can be used for long‑duration logging of slow‑changing phenomena

What power source does it use?

It is powered directly from a USB connection, removing the need for external adaptors.

Which interfaces can be analysed with this unit?

It supports CAN, I2C, SPI, UART and RS232 signalling for protocol‑level inspection.

What resolution and sensitivity are available for amplitude measurements?

The instrument provides 16‑bit vertical resolution with a minimum sensitivity of 2mV/div.

How versatile is the timebase for different test scenarios?

The selectable time base ranges from 1000ns/div to 5000s/div to handle both Rapid and extended events.

What physical size should I expect for portability?

The unit measures 210mm in length, 135mm in width and 40mm in height.