Adaptive Peltier Module, 5.3 W, 2.2 A, 3.8V, 10 mm x 13 mm x 3.8 mm
- RS-stocknr.:
- 490-1250
- Fabrikantnummer:
- ET-031-08-15-RS
- Fabrikant:
- Adaptive
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 38,61
(excl. BTW)
€ 46,72
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Op voorraad
- Plus verzending 70 stuk(s) vanaf 16 maart 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 38,61 |
| 5 - 9 | € 36,68 |
| 10 - 24 | € 35,52 |
| 25 - 99 | € 33,98 |
| 100 + | € 30,12 |
*prijsindicatie
- RS-stocknr.:
- 490-1250
- Fabrikantnummer:
- ET-031-08-15-RS
- Fabrikant:
- Adaptive
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Adaptive | |
| Product Type | Peltier Module | |
| Maximum Cooling Capacity | 5.3W | |
| Maximum Temperature Difference | 74°C | |
| Thickness | 3.8mm | |
| Maximum Current | 2.2A | |
| Maximum Voltage | 3.8V | |
| Lead Wire Type | Unstripped | |
| Width | 13 mm | |
| Standards/Approvals | RoHS | |
| Length | 10mm | |
| Series | ET | |
| Alles selecteren | ||
|---|---|---|
Merk Adaptive | ||
Product Type Peltier Module | ||
Maximum Cooling Capacity 5.3W | ||
Maximum Temperature Difference 74°C | ||
Thickness 3.8mm | ||
Maximum Current 2.2A | ||
Maximum Voltage 3.8V | ||
Lead Wire Type Unstripped | ||
Width 13 mm | ||
Standards/Approvals RoHS | ||
Length 10mm | ||
Series ET | ||
- Land van herkomst:
- CN
Thermoelectric Cooler Modules, Adaptive
The Thermoelectric modules utilise the Peltier phenomenon principle to pump heat when voltage is applied.
Effective cooling power from mW to a hundred of Watts
Max hot side temperature Th = 90°C for best long term performance
Modules can be bonded using heat sink bonder
Applications in refrigeration and power generation
Silicone sealed options
Thermoelectric Modules - Peltier Effect
A range of semiconductor thermoelectric devices working on the Peltier effect. When supplied with a suitable electric current, they can either cool or heat. When subject to an externally applied temperature gradient these devices will generate a small amount of electrical power.The larger devices can be used for cooling or controlling the temperature of sub-assemblies. The small size of the mini module makes it ideally suited for cooling miniature electronic components such as infra-red detector chips, microwave IC's, fibre-optic lasers and detectors.,Alternatively, it may be used to minimise the effects of temperature coefficients on oscillator stability, reference voltages, amplifier offsets etc. by providing temperature control.
Solid-state long term stability
Generates no acoustic noise