Fluke 9062 Phase Rotation Tester 2 Hz, 400 Hz Max, 400V ac Max

This phase rotation tester provides a Rapid indication of three-phase sequence and motor rotation direction in commercial and industrial settings. It determines phase order with either supplied test leads or by non-contact sensing of running motors, enabling electricians and engineers to confirm rotary field direction without requiring shaft visibility. The instrument operates across common supply frequencies and voltages used in motor and installation testing and is powered by a single battery for field portability.

• Phase indication up to 400VAC for broad system compatibility
• Frequency response from 2–400Hz to cover slow to fast machines
• LED display for immediate, easily readable phase sequence information
• Contactless motor rotation detection to assess running equipment safely
• Low current draw at 20mA for extended battery operation
• CAT III 300V safety rating suitable for fixed installation testing

• Suitable for verifying phase order on motor control panels
• Ideal for assessing rotation of synchronous and asynchronous motors while running
• Used with distribution boards during commissioning and fault-finding
• Can be used for maintenance checks where shafts are inaccessible
• Used for on-site confirmation prior to motor coupling and installation

It runs from a single 9V battery and draws approximately 20mA during measurement, providing portable operation for site tasks.

Yes, it accurately indicates phase sequence down to 2Hz, accommodating variable-speed drives and slow-turning machinery.

The instrument is rated for continuous use between 0°C and 40°C and for altitudes up to 2000m with humidity up to 80% non‑condensing.

The package includes test leads, probes and crocodile clips enabling both temporary contact testing and clamped connections in industrial sockets.

It uses an LED display to show rotary field direction and phase order for quick verification on site.