SKF PBMF 506050 M1G1 50mm Bore Bushing, 60 mm OD

This bushing is a flanged bronze sleeve designed to provide a bearing surface for rotating shafts in industrial equipment. It is intended for use where a robust, metallic sliding Interface is required to support axial loads and maintain alignment within assemblies across automation, electrical and mechanical systems.

• Solid bronze construction provides Durable sliding contact and wear resistance • Flanged profile simplifies axial location and prevents lateral movement • 50mm internal bore supports medium-diameter shafts commonly used in machinery • 60mm outside diameter ensures secure housing fit and even load distribution • 50mm width offers extended bearing surface for reduced surface pressure

• Suitable for linear actuators requiring a metallic bearing surface • Ideal for motor shaft interfaces in industrial drives • Used with gearboxes where axial retention is required • Can be used for bearing supports in conveyor systems • Suitable for repair of rotating assemblies in automation equipment

The component is MADE from solid bronze, which provides good conformAbility, resistance to galling and the Ability to operate with moderate contact stresses in lubricated or marginally lubricated conditions.

The flange provides an axial stop against the housing face, allowing the part to be located without additional retaining rings and reducing the risk of axial displacement during operation.

The bore accepts 50mm shafts

It is suitable for industrial environments in which metal-on-metal bearing surfaces are acceptable, including applications with available lubrication and moderate temperatures.