SKF PBM 607060 M1G1 60mm Bore Bushing, 70 mm OD
- RS-stocknr.:
- 465-260
- Fabrikantnummer:
- PBM 607060 M1G1
- Fabrikant:
- SKF
Subtotaal (1 eenheid)*
€ 139,99
(excl. BTW)
€ 169,39
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Voorradig bij de fabrikant
- Klaar voor verzending vanaf 10 september 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 139,99 |
*prijsindicatie
- RS-stocknr.:
- 465-260
- Fabrikantnummer:
- PBM 607060 M1G1
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Product Type | Bushing | |
| Sub Type | Straight Bushing | |
| Bore Diameter | 60mm | |
| Outside Diameter | 70mm | |
| Material | Solid Bronze | |
| Standards/Approvals | No | |
| Width | 60mm | |
| Series | PBM | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Product Type Bushing | ||
Sub Type Straight Bushing | ||
Bore Diameter 60mm | ||
Outside Diameter 70mm | ||
Material Solid Bronze | ||
Standards/Approvals No | ||
Width 60mm | ||
Series PBM | ||
Niet conform
- Land van herkomst:
- SE
SKF PBM Series Bushing, 60mm Bore Size, 70mm Outside Diameter - PBM 607060 M1G1
This bushing is a solid bronze plain bearing designed to provide low-friction support for rotating or sliding shafts in industrial equipment. It is intended for heavy-duty applications where Durable bearing surfaces are required, and it is commonly used as a replaceable sleeve to maintain shaft alignment and reduce wear in mechanical assemblies.
Features and Benefits:
• Solid bronze construction delivers high load capacity and wear resistance
• Straight sleeve form enables simple press-fit installation
• 60mm bore offers compatibility with common metric shafts
• 70mm outside diameter provides robust housing contact area
• 60mm width supplies extended bearing surface for load distribution
• Straight sleeve form enables simple press-fit installation
• 60mm bore offers compatibility with common metric shafts
• 70mm outside diameter provides robust housing contact area
• 60mm width supplies extended bearing surface for load distribution
Applications
• Suitable for bearings in automation actuators and gantries
• Ideal for sliding interfaces in electrical switchgear mechanisms
• Used with rotating shafts in industrial motors and gearboxes
• Can be used for replacement in legacy mechanical assemblies
• Ideal for sliding interfaces in electrical switchgear mechanisms
• Used with rotating shafts in industrial motors and gearboxes
• Can be used for replacement in legacy mechanical assemblies
How should it be installed to ensure correct radial support?
Press-fit into a housing bore with controlled interference to maintain concentricity and avoid shaft run-out.
What maintenance approach extends service life under heavy loads?
Monitor for wear and maintain appropriate lubrication intervals compatible with bronze bearings to minimise surface abrasion.
How does the material behave under continuous operation at elevated loads?
The bronze alloy sustains plasticity under load, providing conformability that helps prevent seizure while gradually wearing to preserve shaft integrity.
What are the considerations when replacing an existing sleeve?
Verify matching internal diameter, housing fit, and axial support to ensure the new sleeve restores original clearance and load distribution.
Gerelateerde Links
- SKF PBM 506050 M1G1 50mm Bore Bearing Assembly, 60 mm OD
- SKF PBMF 506050 M1G1 50mm Bore Bushing, 60 mm OD
- SKF PBMF 607560 M1G1 60mm Bore Bearing Assembly, 75 mm OD
- SKF PCM 606540 E 60mm Bore Bushing 585 kN
- SKF PWM 607040 60mm Bore Spherical Bearing, 70 mm OD
- SKF Plain Bush 70 mm OD
- SKF GE 60 ESX-2LS 60mm Bore Plain Bearing 90 mm OD
- SKF GAC 60 F 60mm Bore Plain Bearing 95 mm OD