JG Speedfit Polyethylene Pipe, 25 m long x, 15 mm Wall Thickness
- RS-stocknr.:
- 281-4104
- Fabrikantnummer:
- 15BPEX-25C
- Fabrikant:
- JG Speedfit
Afbeelding representeert productcategorie
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 104,70
(excl. BTW)
€ 126,69
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 104,70 |
| 5 - 9 | € 101,46 |
| 10 + | € 98,22 |
*prijsindicatie
- RS-stocknr.:
- 281-4104
- Fabrikantnummer:
- 15BPEX-25C
- Fabrikant:
- JG Speedfit
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | JG Speedfit | |
| Length | 25m | |
| Product Type | Polyethylene Pipe | |
| Wall Thickness | 15mm | |
| Material | Polyethylene | |
| Minimum Operating Temperature | 1°C | |
| Standards/Approvals | BS7291-3:2006 Class S, BS 7291 Parts 1 and 3 Class ’S’, Kitemarked | |
| Alles selecteren | ||
|---|---|---|
Merk JG Speedfit | ||
Length 25m | ||
Product Type Polyethylene Pipe | ||
Wall Thickness 15mm | ||
Material Polyethylene | ||
Minimum Operating Temperature 1°C | ||
Standards/Approvals BS7291-3:2006 Class S, BS 7291 Parts 1 and 3 Class ’S’, Kitemarked | ||
Vrijgesteld
- Land van herkomst:
- GB
Barrier Pipe - Speedfit
Cross-linked to polythene pipe tested to DIN 16892
Supplied in either 2 metre lengths in bundles of five or in 25 metre coils
SpeedFit Tube, Conduits & Tube Inserts
Pipe Suitability - Speedfit fittings can be used with: Copper pipe to BS2871 Part 1 / BSEN 1057: 1996, Speedfit cross linked polyethylene (PEX) Barrier Pipe to BS7291. Speedfit fittings cannot be used on stainless steel pipe.,Applications - Mains fed and indirect cold water systems, vented and unvented hot water systems and vented and sealed central heating systems.,Material - Polysulfone, Acetal
Note
Pipe inserts are recommended for installations using plastic pipe (see this section)
Approvals
Approved to WRC, BBA, PKM, PEM
Caution
DO NOT USE FOR: Gas, fuel oil or compressed air applications
Standards
BS EN ISO 9001: BS 7291 Parts 1 & 3 Class S
Gerelateerde Links
- JG Speedfit Polyethylene Pipe, 25 m long x 22 mm OD
- JG Speedfit Nylon Pipe 1.5 mm Wall Thickness
- JG Speedfit Nylon Pipe 22 mm Wall Thickness
- JG Speedfit Polyethylene Oxide Pipe Insert, 22 mm
- JG Speedfit Polyethylene Oxide Pipe Insert, 15 mm
- JG Speedfit Plastic Pipe Fitting
- JG Speedfit Polyoxymethylene Black Pipe Clip
- JG Speedfit Hose Assembly 300 mm Long