RS PRO Opaque Fluoroplastics PTFE Rod, 300mm x 120mm Diameter
- RS-stocknr.:
- 197-0023
- Fabrikant:
- RS PRO
4 op voorraad - levertijd is 4 werkdag(en).
Toegevoegd
Prijs 1 partij 1
€ 463,89
(excl. BTW)
€ 561,31
(incl. BTW)
| Lot(s) | Per lot |
| 1 - 2 | € 463,89 |
| 3 - 5 | € 431,42 |
| 6 - 11 | € 408,21 |
| 12 + | € 371,11 |
- RS-stocknr.:
- 197-0023
- Fabrikant:
- RS PRO
Datasheets
Wetgeving en compliance
- Land van herkomst:
- IT
Productomschrijving
PTFE (Extruded)
Extremely high chemical resistance
Wide temperature range - maximum service temperature 260°C
Low friction and low adhesion
Resistant to Radiation
Excellent dielectric performance
Extremely high chemical resistance
Wide temperature range - maximum service temperature 260°C
Low friction and low adhesion
Resistant to Radiation
Excellent dielectric performance
Note
The PTFE sheets supplied have a size tolerance of ±5 mm
Standards
DIN 53479; DIN 53736; ASTM-D 1929
Specificaties
Kenmerk | Waarde |
|---|---|
| Colour | Opaque |
| Length | 300mm |
| Material | PTFE |
| Form | Rod |
| Rod Diameter | 120mm |
| Density | 2.18 → 2.21g/cm³ |
| Tensile Strength | 25 MPa |
| Flammability Rating | UL 94 V-0 |
| Maximum Operating Temperature | +260°C |
| Hardness | 30 Ball Indentation |
| Suitability | Etching Plates & High Frequency Insulation, Pipe Lining, Pump Housing, Roller Covering, Slide Bearing & Runners |
| Thermal Conductivity | 0.25W/mK |
| Elongation | 50% |
| Melting Point | +327°C |
| Water Absorption | 0.3% |