Siemens JB 510 Series Output Module, Bistable Relay Contact, 24 V dc
- RS-stocknr.:
- 287-8627
- Fabrikantnummer:
- JB 510C23 / 5WG1510-4CB23
- Fabrikant:
- Siemens
Niet beschikbaar
RS heeft dit product niet meer op voorraad.
- RS-stocknr.:
- 287-8627
- Fabrikantnummer:
- JB 510C23 / 5WG1510-4CB23
- Fabrikant:
- Siemens
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Siemens | |
| Alles selecteren | ||
|---|---|---|
Merk Siemens | ||
- Land van herkomst:
- RO
The Siemens binary output is a KNX device with two switching outputs. The device is installed in a 4 x 4 inch junction box. The bus is connected via a bus terminal block. The actuator electronics are supplied via the bus voltage. The binary output can switch resistive loads, inductive loads, or capacitive loads.
Each output of the actuator may be set to one of the following operating modes, normal operation and timer operation
Gerelateerde Links
- Siemens JB Series Adapter DC 24V
- Siemens UP 510 Series Output Module for Use with BTI Interface
- Siemens JB Series Adapter 24 V dc
- Siemens JB 512 Series Adapter 24 V dc
- Siemens RS 510 Series Output Module for Use with Ap 118 Control Module Box or Ap 641 Room Control Box
- Siemens JB Dimming Controller Switch Actuator, 24 V dc
- Siemens RS 510 Series Adapter for Use with Ap 118 Control Module Box or Ap 641 Room Control Box
- Schneider Electric Telefast Series Module 16-Input16 Outputs