Pepperl + Fuchs PLC Power Supply VAN Series AS-I, 30.55V dc, 8 A 91 x 124 x 102 mm

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: DE
Productomschrijving

AS-I Power Supply

Available for 4 and 8 A output loading
90-265 VAC power pack
SELV
LED operating display
AS-Interface data decoupling
Power factor correction

Note

The two flat cables necessary for power and signal transmission are also available in the cable section. Data transmission cable: 242-6189, Power transmission cable: 623-7810.

//media.rs-online.com/t_line/L316042-01.gif

Actuator Sensor Interface (AS-I)

Actuator Sensor Interface, AS-I

AS-I is a method of providing communication from simple discrete components such as an inductive sensor or switching valve via a simple two-wire network to a controlling device such as a PLC or PC.
A unique feature of the AS-I system is the flat, two-core cable (stock no 242-6189) designed to enable fast and easy connection, ensuring correct polarity every time. The cable can be used in a network up to 100m (300m if repeaters are used).
By providing power and data down the same cable, the amount of time normally used to connect sensors and actuators is dramatically reduced, thereby providing savings in cable requirements and man-hours.
The choice of AS-I connection modules enables the user to connect standard sensors/actuators to the BUS with all the address benefits of using dedicated sensors/actuators. It also serves to increase the number of I/O nodes that are available to the user by the use of addressable splitter boxes. The connection modules are available in a variety of packages and can accommodate up to 4 inputs and 4 outputs. This enables up to 124 inputs and 124 outputs to be connected to a single AS-I network.
Another feature of AS-I system is the method by which the sensors or modules communicate with the host. The design of the communications protocol ensures high data accuracy and error detection capabilities, making the ASI system ideal for automation in noisy and industrial environments.

Benefits of AS-I

Replaces hard wiring
High data speed
Low cost installation
Intelligent diagnostics
Easy to learn and install
Highly flexible
Can connect to other fieldbus systems
User-friendly
Off-site pre-assembly and test
Easy maintenance
Faster on-site commissioning
Host or stand alone use
Able to use standard sensors and actuators (using modules)

Specificaties
Kenmerk Waarde
Manufacturer Series VAN
For Use With AS-I
User Power Output Voltage 30.55V dc
Output Current 8 A
Length 91mm
Width 124mm
Depth 102mm
Minimum Operating Temperature -10°C
Maximum Operating Temperature +70°C
Dimensions 91 x 124 x 102 mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 12-10-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
335,00
(excl. BTW)
405,35
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 335,00
Related Products
Mixed contact connectors suitable for making combined signal ...
Description:
Mixed contact connectors suitable for making combined signal and power connections. Plug and socket options with solder bucket or 90° PCB terminations. Shell definition: 17W2 shell can have 17 mixed contacts in total. Shell is supplied with 15 signal contacts ...
132 with screw/spring terminal digital I/O244 with HE10 ...
Description:
132 with screw/spring terminal digital I/O244 with HE10 type connector digital I/O48 analogue I/O (24 input/24 output channels). 3 Communication base modules each with 20 I/O Expandable using 8 to 32 channel I/O modules (up to 264 channels)Wide range of ...
With our Bulletin 2080 Micro800™ Programmable Logic Controllers ...
Description:
With our Bulletin 2080 Micro800™ Programmable Logic Controllers Plug-in Modules and Accessories, you can adapt your base unit controller to fit your application needs. Extend the functionality of embedded I/O without increasing the footprint of your controller. Increase the system ...
The RevPi DI, like its counterparts, the DO/DIO, ...
Description:
The RevPi DI, like its counterparts, the DO/DIO, features a 28 pin connector on the front side of the module (2 rows of 14 male pins) and comes with female connectors with spring clip contacts up to 1.5mm². The DI ...